全部

1·Inverse integral method is used for compressible turbulent boundary layer.

湍流边界层采用积分反方法。

2·Finally recent studies of turbulent boundary layer separation are also briefly reviewed.

最后简单介绍了目前在研究湍流边界层分离方面的进展。

3·The scouring mechanism of each pattern is probed in the light of turbulent boundary layer and velocity of mass transport.

并从紊流边界层及传质速度出发，探讨了三种冲刷形态的冲刷机理。

4·Abstract: The traditional BPM semi-empirical prediction airfoil turbulent boundary layer trailing edge noise was improved.

摘要：改进了传统的翼型湍流边界层尾缘噪声bpm半经验预测公式。

5·The influence of a viscoelastic compliant wall on the turbulent boundary layer was studied from the viewpoint of stability.

本文从稳定性的观点出发，研究了粘弹性柔性壁对湍流边界层的影响。

6·The separating flow in a turbulent boundary layer was surveyed in a 2-d curved-wall diffuser by employing 2-d laser Doppler velometer.

应用二维激光多普勒仪测量了二元曲壁非对称扩张通道内的湍流附面层分离流动。

7·As a result, roughly half the fuel required to maintain a level cruise is being burned to overcome the drag imposed by a turbulent boundary layer.

因此，保持巡航速度消耗的燃料大约一半都是用于克服紊流产生的阻力。

8·A method is proposed to calculated the incompressible three-dimensional turbulent boundary layer on both wall surfaces of vaneless diffusers.

提出了一种计算无叶扩压器两壁面上不可压缩三元紊流附面层的方法。

9·Three-dimensional turbulent boundary layer on the ground board is measured through the ground effect tests of a delta wing with aspect ratio 3.

本文通过一个展弦比为3的三角形机翼的地面效应试验，测量了地板上的三元紊流附面层。

10·It is employed the concept of multi-scale coherent structures to study the mechanism of riblet surface drag reduction in turbulent boundary layer.

将湍流多尺度相干结构的概念引入沟槽壁面湍流边界层减阻机理的研究。