全部

1·The concentration factor (CF) and time (t) was linear regression relation.

浓集系数(CF)与时间(t)呈线性关系。

2·The expression for calculating dynamic stress concentration factor is presented.

给出了动应力集中系数的计算表达式。

3·For Poropak Q a concentration factor 500 was obtained compared to a 1 cc sample loop.

对于泊帕克q，相对于1毫升样品环管得到的浓缩因子为500。

4·The stress concentration factor of cylinder is much larger than that of other three kinds.

圆柱形颗粒的应力集中在基体达到屈服后要远远高于其他三种颗粒。

5·The stress concentration factor of the gun tube pit was defined. The FEM models of the pits were built by MSC.

探索出一种估算压坑中最大应力强度的方法：定义了压坑应力集中系数，通过MSC。

6·The experimental result also shows that composite edge has the effect of increasing strain concentration factor.

试验结果还说明复合材料边缘有提高应变集中系数的效应。

7·The stress concentration factor (SCF) decreased with the increase of the width of plates when the hole diameter was definite.

结果表明：在开孔尺寸一定的情况下，随着板宽的增大，开孔损伤板的应力集中因数减小；

8·The relationship between concentration factor of byssus and whole body wet weight (or shell length) is a negative power function.

足丝的浓集团子与贻贝整体湿重（或壳长）呈负幂函数关系。

9·Thus, the stress concentration factor due to the misalignment should be considered in the analysis of fatigue life of the local structures.

因此，在对局部结构进行疲劳强度分析时，应考虑错位对于应力集中系数的影响。

10·Stress concentration factor generally is calculated based elastic mechanics method or empirical equation derived the conclusion of testing.

应力集中系数一般由实验确定或由弹性力学方法求出。