全部

1·It takes limestone and mixes it with recycled plastics which act as a bonding agent.

材质方面采用了石灰石，并与作为胶合剂的再生塑胶相混合。

2·Aim: to develop a new visible light-cured bonding agent to replace VLC-1 type bonding agent.

目的：研制一种可取代VLC - 1型粘结剂的新型可见光固化粘结剂。

3·It relates to technical progress of silicone bonding agent resistance to heat both at home and abroad.

综述国内外耐热硅橡胶粘合剂的技术进展情况。

4·The bonding agent can be used within 3 months after production, if more than 3 the binders would fail to work.

结合剂请在出厂后3个月内使用，如果超过3个月结合剂的性能将失效。

5·The product is made with6020polyester thin film coated with bonding agent and compounded with insulation paper.

该产品是有6020聚酯薄膜涂以粘合剂再与绝缘纸复合而成。

6·The optimum condition was determined by orthogonal design, and a bonding agent was prepared under the condition.

用正交设计法确定了最佳工艺条件，并在此条件下制取了粘合剂。

7·The special chemical structure character of borax results in that it can be used as bonding agent in some conditions.

硼砂特殊的化学结构特征决定了它在一定条件下可以作为粘结剂使用。

8·The existence of any extender is not necessary for increasing the elongation of HTPB propellants by bonding agent MAPO.

扩链剂的存在不是键合剂MAPO提高丁羟推进剂伸长率的必要条件。

9·Skim Ad-Bond latex is a styrene acrylic polymer latex additive for use as a bonding agent, primer, or damp resistant sealer.

实坚乳胶增黏剂是一种苯乙烯丙烯酸聚合物乳胶添加剂，可作为黏结剂、底层剂及抗潮湿封填剂。

10·The property, use, instruction and application of rubber-metal curing bonding agent RM-1 were mainly introduced in this paper.

主要介绍RM-1橡胶金属硫化胶粘剂的性能、用途、使用说明及应用情况。

粘合剂

1·The methods for preparing structural material bonding agent by condensing the alkaline lignin in the wast liquor of soda pulping process with formaldehyde and phenol are described.

本文叙述了利用碱法制浆废液中的碱木素同苯酚、甲醛缩合制取结构材料粘合剂的方法。

2·The main problems met in the course of the development of the EF Bonding Agent and the main mechanical property, rheological properties and usage are also discussed.

讨论了这种EF型粘合剂研制过程中遇到的主要问题，并介绍了它们的主要力学性能、流变性能和使用方法。