全部

1·The results show that the thermomechanical treatment can improve the quality of the automobile steering knuckle.

结果表明，锻造余热淬火工艺对汽车转向节质量有明显改善。

2·After thermomechanical treatment, the natural quenched alloy has coarser precipitates and its distribution is inhomogeneous.

热轧后经自然冷却的合金经热机械处理后，析出相粒子较大，分布也不均匀；

3·Influence of trace elements and thermomechanical treatment on fatigue performance of Cu based elastic alloy has been investigated.

结果表明：铜基弹性合金通过多元少量微合金化与形变热处理工艺相配合，能显著提高材料的疲劳性能。

4·The effect of thermomechanical treatment on the microstructure and properties of the automobile steering knuckle was researched in this paper.

研究了汽车转向节锻后余热淬火工艺对钢的组织和性能的影响。

5·High temperature thermomechanical treatment (HTMT) is a kind of TMT. It has been applied in the production of sintered steel and powder forging steel.

高温形变淬火是形变热处理的一种，它在烧结钢和粉末锻钢的生产中得到了应用。

6·The effects of thermomechanical treatment on the structures and properties of 7a04 aluminum alloy were studied by mechanical tensile test, metallographic and TEM analysis.

采用力学性能测试、金相显微分析和TEM等方法。研究了形变热处理工艺对7a04铝合金的组织和性能的影响。