全部

1·The cooling rate and denudation rate decreased overall from north to south.

总体上自北而南，剥蚀速率和冷却速率均逐渐变小。

2·The critical cooling rate for the glass formation in the tube was determined.

确定了在落管中形成玻璃的临界冷却速率。

3·Two methods for reducing cooling rate during underwater wet welding are studied.

研究了两种能应用于水下湿法焊接的缓冷方法。

4·The glass transition temperature of PLLA decreased with the increase of cooling rate.

玻璃化温度和结晶度随着降温速率的降低而增大。

5·The cooling rate is faster in chromite sand mold, but also causes more porosity in castings.

铬砂制作的砂模可让铸件有较快的冷却速率，但也产生较多的微孔隙。

6·The results indicate that the emerging surface crackle are due to the too rapid cooling rate.

研究结果表明表面裂纹是因冷却速率过快所造成的。

7·The atmospheric radiation balance and the net radiation cooling rate in tropo-spheric layers.

对流层内各层大气的辐射差额及其辐射冷却率。

8·Finally, I tested the parsing by checking to see if the object contained a cooling rate multiplier.

最后，通过检查此对象是否包含冷却率乘数测试解析过程。

9·The strength of waxy structure and gelation temperature decreased when increasing cooling rate.

降温速率越高，测量温度下蜡晶结构强度和胶凝温度越低。

10·However, the cooling rate obtained in these tests was very difficult to do under the industrial scale.

然而，实验室条件下试验所达到的冷却速率在工业化生产中较难实现。