全部

1·For both vertical and horizontal well systems, oil recovery decreases with increasing mobility ratio.

无论垂直井还是水平井系统，采收率都随流度比的增加而减少。

2·The improved mobility ratio and the adjusted cut plane by the emulsion enhanced the heavy crude recovery efficiency.

乳状液的形成改善了流度比，调整了注采剖面，提高了稠油采收率。

3·On the basis, the influence of dimensionless apparent permeability variation factor and mobility ratio to pressure behavior has been analyzed.

在此基础上，分析无因次表观渗透率变化系数和流度比对压力动态的影响。

4·It is shown that the next call blocking probability is related to location update failure probability, call to mobility ratio and the previous call status.

理论分析结果表明，下一次呼叫阻塞率不仅和位置更新失败率、呼叫移动比有关，还与前一次呼叫状态有关。

5·With this model, the pressure drop curve of well testing is interpreted, and mobility ratio, diffusion ratio, sweep radius of each area and some other parameters are solved.

利用该模型可以对火烧油层注气井试井压降曲线进行解释，并求解流度比、扩散比以及各区的波及半径等参数。

6·The development effectiveness of water flooding for the heavy oil reservoir with edge water is poor because of the high oil viscosity, high mobility ratio and the invasion of edge water.

注水开发多年的具边水的普通稠油油藏的原油粘度高、流度比大，加之油藏非均质及边水入侵的影响，其注水开发效果较差。

7·Foam profile controlling system can improve the mobility ratio, adjust the water injection profile and improve the efficiency of oil washing in porous media, but the system has poor stability.

泡沫调剖体系在多孔介质中能够有效改善流度比，调整吸水剖面，提高洗油效率，但是体系稳定性较差。

8·We conclude that the extremum factor of the Hall coefficient is a good measure of the Hall characteristic, and it can be also used to determine the mobility ratio of carriers in semiconductors.

作者提出了采用霍尔极值因数来表征不同半导体材料的霍尔特性及测量载流子迁移率之比值的新方法。

9·This paper performs a large number of heterogeneous and homogeneous core physical simulation experiments and gives the reasonable mobility ratio of polymer flooding, ASP flooding and oil displacement.

通过大量非均质和均质岩心物理模拟实验，给出了三元复合驱和聚合物驱替原油时的合理流度比。

10·The result shows that, the proposed mechanism reduces the handoff delay and the packet loss ratio both in micro-mobility and macro-mobility environments.

结果显示，无论在微移动或宏移动环境中，该机制都可以有效的减少切换时延和分组丢失。