全部

1·Percentage of revenue from backplane production.

背板产品在营业收入中的比例？

2·Percentage of revenue from backplane production.

背板产品在营业收入中的比例。

3·A design of high speed backplane bus is introduced in this paper.

介绍了一个高速背板总线的设计尝试。

4·The solidification period of housing backplane casting has been analyzed.

分析了机架底板铸件凝固补缩过程。

5·The backplane of the scanner mainframe will connect the appropriate Banks of each card.

扫描仪主机的背板可连接每个开的相应开关组。

6·You can alter various parameters and it will print out a winding template and backplane.

你可以改变不同的参数，打印出螺旋模板和底板。

7·The backplane anchor address is established by configuration constants or by boot parameters.

主板锚的地址可以通过配置宏或者启动参数确定下来。

8·The new backplane design is divided into three areas, to ensure more even distribution of steam.

新的背板设计分为三个方面，以确保更均匀蒸汽分布。

9·The following paragraphs discuss the analog backplane, triggers, and digital I/O in greater detail.

以下部分较详细地讨论模拟背板、触发和数字I/O。

10·The backplane is a complex system containing a number of variables that can impact signal integrity.

背板是一个复杂的系统。它包括了一定数量的影响到信号完整性的变量。

背板

1·Each CUDA-capable GPU node includes local DDR3 SDRAM as well as a 16-lane PCI Express? gen2 interface to the system backplane, providing maximum data throughput direct to GPU memory.

每个CUDA GPU节点包括本地的DDR3 SDRAM以及一个16通道PCI二代系统的背板接口，直接向GPU内存提供最大的数据流量。

2·A Rapid IO Processor is an inter-connect technology that connects chips on a circuit board and circuit boards to each other using a backplane.

SRIO处理器是一个互连技术，并用一个背板使电路板上的芯片相互连接。

3·To connect the outputs of the cards together, certain cards have their outputs connected to the backplane of the scanner mainframe.

为了将开关卡的输出连接在一起，特定开关卡的输出都会被连接到扫描仪主机的背板。

4·If a particular switch card with no backplane connection is installed in a slot of the mainframe, it will be electrically isolated from other CARDS installed in the mainframe.

如果将没有背板连接的特殊开关卡安装到主机的某个插槽，那么它和主机中安装的其它插卡则是电气隔离的。

5·The backplane is a complex system containing a number of variables that can impact signal integrity.

背板是一个复杂的系统。它包括了一定数量的影响到信号完整性的变量。

底板

1·You can alter various parameters and it will print out a winding template and backplane.

你可以改变不同的参数，打印出螺旋模板和底板。

2·Provides basic foundation for any designer through a service and data backplane, and manipulation of metadata.

通过服务和数据底板以及对元数据的操作为任何设计器提供基础。

3·The solidification period of housing backplane casting has been analyzed.

分析了机架底板铸件凝固补缩过程。