全部

1·Increase the center distance.

增大中心距。

2·Applicable for all cylinder of different diameter by adjusting the trolley center distance.

通过调整滚轮的中心距，适用不同直径筒体。

3·In certain conditions, the center distance reduction will cause additional radial pressure of two mating gears.

在一定条件下，这种中心距缩减会导致互相啮合的两齿轮间产生附加径向压力。

4·All of this got data reference and design basis for eccentric mechanism for adjusting the center distance and others.

通过优化为楔横轧机偏心中心距调整机构及相关机构的设计提供了良好的数据参考、设计依据。

5·Dies seat: Adopt West Germany technology (Inlay type), assure the drawing center distance to avoid the wire breakage.

模座：采用西德技术(镶入式)，保证拉伸的中心距，减少断线机率。

6·The best tightness is: in the middle of the chain lift or press down, the center distance of the two sprocket is about 2%-3%.

则最好的松紧程度为：链条的中部在提起或压下的时候，两链轮中心距的约为2% - 3%。

7·The conjugate principle of the variable ratio gear with constant center distance and constant contact Angle has been analysed.

研究了定中心距、定啮合角变速比齿轮的啮合原理。

8·Through orthogonal experiment, parameter of back zone draft multiple, roller center distance and roving twist factor are selected.

并通过正交试验对后区牵伸倍数、罗拉中心距和粗纱捻系数进行了优选。

9·The center distance of two holes is equal to the center distance of the corresponding venting hole and the water hole of the boiler.

两孔的中心距与相应锅炉通气孔、通水孔的中心距相等；

10·The ionospheric up flowing ion mainly distributes in the near geo space and its flux has a negative gradient versus geo center distance.

上行离子主要分布在近地空间，其通量密度相对于地心距离呈负梯度。