全部

1·RCD snubber circuit is designed to solve the IGBT switching loss problem.

RCD缓冲电路的设计降低了IGBT的开关损耗。

2·Zero switching loss can be used to make it affected only by inherent characters of devices.

要提高开关频率可采用使开关损耗为零的方法，使之只受器件的固有参数限制。

3·The voltage peak and switching loss during switching of inverter is the main cause that due to the damage of IGBT.

逆变桥电路开关过程中出现的电压尖峰和大的开关损耗是导致主开关器件igbt损坏的主要原因之一。

4·And the power dissipation is 0.11W (including switching loss) when supply voltage is 12V. The designed chip was taped out.

此外，芯片在12V供电电压下的稳态工作功耗仅为0.11W（包括开关损耗）。

5·How to reduce the switching loss of the power electron equipment is the key technology of high power of chopping AC regulator.

如何减少电力电子器材的开关损耗，是斩控式交流调压器大功率化的关键技术。

6·With high chopping frequency and novel control strategy, the size of filter elements is reduced and switching loss of IGBTs drops.

由于采用了较高的斩波频率和新颖的控制策略，减小了滤波元件的尺寸，并降低了IGBT的开关损耗。

7·As a new technique, the recently developed quasi-resonant technique can improve the efficiency of converters by reducing the switching loss.

准谐振技术是近年来提出的减小开关损耗，提高变换器效率的一种新技术。

8·Proposed in this paper is a new method to reduce the switching loss of active power filter (APF) through adjusting the hysteresis band width.

提出了一种调节滞环宽度、减少有源电力滤波器(APF)的开关损耗的方法。

9·Forming cross functional teams that work on one project at a time is vital to increasing throughput and productivity by reducing switching loss.

生成在一个项目上合作的跨职能团队对于增加软件项目交付总量和生产效率来说是最为关键的。

10·In order to decrease the switching loss and increase the efficiency of the converter, a improved RCD snubber is presented. Then its working modes are analyzed.

为了降低开关管应力，提高变换器的效率，设计了变形rcd缓冲电路，详细分析了其工作原理并计算了主要元件参数。