全部

1·Effectiveness of the FEM analysis for the creep behavior of the ortho-anisotropic material is proved by the experimental results.

然后， 针对气冷叶片的特点， 探讨多孔构件的简化蠕变有限元分析方法。

2·With practical examples, I have calculated the unidirectional fiber-reinforced composite material engineering constants and discussed the finite element issue of anisotropic materials.

结合工程实例，计算了单向纤维增强复合材料工程常数，探讨了各向异性材料的有限元问题。

3·There is a distinct difference between tensile and compressive modulus. Xylem is a kind of anisotropic material and modeling its mechanical model needs anisotropic constitutive relations.

拉伸弹性模量与压缩弹性模量有明显差异，木质部属各向异性材料，建立力学模型应采用各向异性的本构关系。

4·The Finite-Difference Time Domain (FDTD) algorithms of anisotropic material was used to analyze the plane wave scattering by slots on the conducting target loaded with anisotropic material.

本文利用各向异性时域有限差分法（FDTD）分析填充各向异性介质凹槽的金属目标的电磁散射。

5·This model took account of material anisotropic and work hardening properties, and included the influence of the Bauschinger effect.

该模型考虑了材料的各向异性、加工硬化特性及包辛格效应的影响。

6·For the isotropic plastic material, the anisotropic plastic stress fields at a slowly propagating crack tip become the perfectly plastic stress fields.

对于各向同性塑性材料，缓慢扩展裂纹尖端的各向异性塑性应力场就变成理想塑性应力场。

7·The results indicate that the optical nonlinearity of bulk material may be enhanced by 1 ~ 2 orders of magnitude through anisotropic microstructure.

结果表明，复合材料微结构的各向异性能够使得整体复合材料的非线性光学增强达1 ~ 2个量级。

8·To characterize relative orientation between the loading direction and material fabric, an anisotropic variable expressed by the joint invariants of the stress tensor and fabric tensor is introduced.

为了描述材料的各向异性，引入了一个由应力张量和组构张量的联合不变量表达的各向异性参数。

9·As a kind of inhomogeneous and complex geological material, rocks are of distinctly nonlinear and anisotropic mechanical behavior.

岩石作为一种复杂的非均质地质材料，其力学响应表现出明显的非线性和各向异性特点。

10·According to the nonhomogeneous anisotropic elastic theory, a calculation model of the composite material plate with the circular hole in joint structures is set up.

本文针对连接结构中含圆孔的复合材料板，根据非均质各向异性弹性理论建立计算模型。