全部

1·The front end of the TEM horn antenna is a parallel plate transmission line.

TEM喇叭天线的前端是平行板传输线。

2·An improved method of Angle measurement is proposed based on a parallel plate interferometer.

提出一种基于平行平板干涉仪的改进型角度测量方法。

3·A parallel plate flow chamber system was developed to produce the definite shear stress in vitro.

利用建立的平板流动小室系统可在体外产生特定的流动剪切力。

4·As excitation magnitude increases, the 1st resonant frequency of the parallel plate fuel assembly decreases.

试验结果表明：随着激励振级加大，板状燃料组件的第一阶共振频率减小；

5·Therefore, the parallel plate flow chamber system was developed according to the classical theory and methods.

参照传统平行平板流室的理论和方法，研究适用于体外细胞的流体剪切力加载装置。

6·The theory and method in measuring accurately the electronic and vacuum dielectric constant of parallel plate capacitor are introduced.

介绍了用电子分析天平测量平行板电容器两极板间的静电力和真空介电常量的原理和方法。

7·The bifurcation and chaotic behavior of a parallel plate-type structure with nonlinear elastic support in axial flow were investigated.

研究了轴向流作用下板状叠层结构在非线性弹性支承下的分岔与混沌行为。

8·A position detection system is incorporated into a parallel plate interferometer in order to realize large deflection Angle measurement.

为了实现较大的偏转角度测量，该平行平板干涉仪引入了一位置探测系统。

9·An optimal design method of parallel plate interferometer is proposed in order to increase the measurement accuracy of angular displacement.

提出一种可提高平行平板角位移干涉测量仪测量精度的优化设计方法。

10·The platelet adhesion on surface of fibrillar collagen under high shear rate condition was observed by parallel plate flow chamber with McAb.

利用平行板流动小室技术研究在高剪切力条件下该单抗对血小板在胶原表面黏附的抑制效果。