全部

1·The key feature of our simplified design method is the introduction of a proper amplification coefficient inver…

研究结果表明这种方法是简单和实用的。

2·In construction design, there is still no a reasonable uniform cost about the rigidity amplification coefficient of center beam and boundary beam.

在结构设计中，选择一个合理的中梁、边梁刚度放大系数和选择一个合理的梁端弯矩调幅系数一直没有得到一个统一的值。

3·The results indicate that the moment amplification coefficient at the bottom section of columns in the ground floor should be compatible to that of the upper stories;

分析结果初步表明，要使结构全面满足抗震设计要求，底层柱下端截面弯矩增强系数的取值应与上部各层柱的增强措施相匹配；

4·Then, the structural influencing coefficient and displacement amplification factor are calculated and compared with the analysis result of Pushover method.

本文系统地分析了多层抗弯钢框架的结构影响系数和位移放大系数。

5·This paper reports a simple similar amplification of polymerization tank. The formula is reliable by production. The coefficient and the efficiency are feasible.

本文提出了聚合釜相似放大的简便计算公式．并经生产验证是可靠的，所取系数、效率是可行的。

6·Some parameters such as fiber length, dispersion slope, nonlinearity coefficient, and pump power have important impact on gain and bandwidth in optical fiber amplification system.

详细研究了光纤参量放大系统中的增益和带宽与各主要参数如光纤长度、色散斜率、非线性系数、泵浦光功率等的关系。

7·Numerical examples are given to illustrate the influence of saturation, soil properties, layer thickness, coefficient of viscoelasticity, and frequency on the motion amplification.

给出了数值算例并进一步研究了饱和度、粘弹性系数、土层厚度以及频率对放大系数的影响。