全部

1·Chinese medicine spray drying, granulating and coating.

中药喷雾制粒及包衣。

2·The types and reasons for wall sticking during spray drying were analysed.

对喷雾干燥粘壁的类型和原因进行了分析。

3·Objective To study the stability of glucosamine sulfate prepared by spray drying.

目的硫酸氨基葡萄糖喷雾干燥后稳定性试验。

4·Spray drying is a liquid process shaping and drying industry, the most widely used process.

喷雾干燥是液体工艺成形和干燥工业中最广泛应用的工艺。

5·OBJECTIVE To screen and improve spray drying condition for the extract and obtain the best process.

目的对风热感冒提取液喷雾干燥时的条件进行筛选和改进，寻求最佳工艺条件。

6·Require inspection once every two weeks flipping once, if the sand and spray drying may be appropriate.

需要检验每两周一次翻转一次，如果沙子和喷雾干燥可能是适当的。

7·The thermo mechanism of spray drying technology is rather complex and generally studied by experiments.

喷雾干燥技术的热干燥机理十分复杂，机理的研究一般采用实验的方法。

8·The effect of acidification and concentration of longan juice on spray drying longan powder was studied.

以龙眼为原料，研究了加工过程中龙眼汁酸化和浓缩对龙眼喷雾干燥的影响。

9·High viscosity paste should not use spray drying method, and the cost of this method is high, generally use.

高粘度糊液不宜使用喷雾干燥法，且这种制法成本较高，一般很少采用。

10·One kind of VAE redispersible polymer powders were prepared by the method of spray drying with fit technical parameters.

通过控制适当的工艺参数，采用喷雾干燥法成功制备了VAE类可再分散聚合物粉末。