全部

1·Big roller diameter, high efficiency.

大，熨烫效率高。

2·The needle roller diameter decreases towards the ends.

针滚直径越向末端越小。

3·It is the basis to determine the roller diameter position and strain analysis.

它是确定轧辊滚动直径位置和张力分析的基础。

4·An improperly designed hot roller can cause fabric edge in excess of rolling pressure due to the increased roller diameter near the journal ends.

不适当的热轧辊设计会导致织物边缘过度轧压，这是因为热轧辊端部附近直径增大引起的。

5·The designed parameters of mechanical capabilities of the roll caster should be raised when rolling pressure increase with roller diameter increase.

随着铸轧辊径增大， 轧制压力增大，因此铸轧机力能设计参数也要相应增大。

6·To deduce the formulas for evaluating feed diameter, roller diameter and rolling moment of flattener, obtain the practical formulas and give a computer program.

对扁丝机的进料直径、轧辊直径和轧制力矩的计算公式进行推导，得出了实用计算公式并提供了计算程序。

7·The paper introduces the difficulties of roller spray welding technique such as controlling for distortion, keeping for layer evenness and dimension of roller diameter.

就轧辊喷焊的技术关键问题：变形控制，涂层均匀性的控制，喷焊后辊子外径尺寸控制及轧辊的组焊工艺等，作以介绍。

8·The outside diameter, outer ring width and shaft seat diameter are identical to the dimensions of the standard spherical roller bearings range.

外部直径，外圈的宽度和轴座直径相同的尺寸标准的球面滚子轴承范围。

9·Use diameter 500 super big mirror roller, iron effect much better.

采用直径500的超大镜面滚，熨光效果更为明显。

10·STAND: Overall width of the assembled bearing; refers to the combination of sizes of the cone, outer diameter, cup, inner diameter, and roller.

座高：整套轴承的总宽度；参考内外圈尺寸，外径，内径以及滚子。