全部

1·It has excellent joint filling capacity to be filled in one application, which allows deep joints to 10 mm with 3-10 mm wide.

它卓越的接合处填补功能可深达10毫米及宽达3至10毫米的接合处一次填妥完毕。

2·Joint filling is no needed. The core value of Palletstone is the visual effect. Joint filling will seriously influence the model and surface effect of Palletstone.

不需要填缝，派丽石系列产品的核心价值就是唯美的视觉效果。留缝再填缝会很大程度地影响派丽石的造型和表面效果。

3·Joint filling 48 hours after macadamize, use the mixture of cement and crushed sand with 1:0.5 to fill, after that, use the water to clean roughly the tile surface.

铺装48小时后进行填缝，用水泥与石粉以1：0 . 5的比例确实填满砖缝，并确实地把砖面用清水清洗干净。

4·This kind of brazing filler metal had a good filling performance, at the same time, sound high-temperature strength and impact toughness can be obtained in the joint.

该钎料不仅具有较好的填缝能力，同时获得的钎缝接头具有良好的高温强度和抗冲击性能。

5·The test results show that by the joint action with the concrete admixture, the pozzolanic, micro-aggregate filling and durable effects of KGF powder can be realized properly.

在混凝土外加剂的共同作用下，KGF粉可以很好地发挥火山灰效应、微集料填充效应和耐久性效应。

6·This thesis introduces a new No-filling material field joint design for subsea pipeline.

介绍了一种“无填充材料”新型海底管道现场接点设计方案。

7·The material enters the discharge hose through the one-way valve in the outlet joint. Now a filling cycle is completed.

物料通过出料接头内的单向阀门，进入出料软管，进入待灌空瓶，完成一次灌装。

8·Conclusion: Knee joint air-filling contrast CT examination had important diagnostic value for synovial fold syndrome. synovioma, synovitis and manysynovial diseases.

结论：膝关节充气造影CT检查对滑膜皱赞综合征、滑股肿瘤、滑膜炎等许多洛膜病具有重要诊断价值。

9·The welded joint was completed by root welding, filling welding and cover welding, their welding parameters were obtained from the experimental analysis.

整个焊接接头要通过根焊、填充焊和盖面焊来完成，通过试验分析得到各焊道所对应的焊接工艺参数。