全部

1·The plate is divided into hot rolling and cold rolling.

钢板按轧制分，分热轧的和冷轧的。

2·Especially for aluminum alloy products of hot rolling process.

特别适用于铝合金制品之热轧工艺加工。

3·The results showed that no new phase is generated in the hot rolling .

而且，在热压过程中没有新相生成。

4·The automatic shape control system is under tandem mills for hot rolling.

热轧板形自动控制系统是多机架的控制系统。

5·This type of defect is formed during the hot rolling process of the raw material.

这种类型的缺陷形成的热轧过程的原材料。

6·The automatic gauge control (AGC) robust control for hot rolling strip is studied.

研究了热轧带钢自动厚度控制（AGC）的鲁棒控制问题。

7·For hot rolling, roll profile is the important condition of realizing shape control.

对热轧而言，辊型是实现板形控制的重要条件。

8·We manufacture hot rolling steel pipes, straight seam pipes and seamless steel pipes.

我公司生产热轧钢管，直缝钢管和无缝钢管。

9·The effect of moisture content on shale stability was investigated by hot rolling test.

用改进的热滚分散法探讨了含水量对硬脆性泥页岩稳定性的影响。

10·The retained hot rolling structure and weak texture in final strip product are observed.

板带的最终组织中含有残留的热轧织构，织构组分较杂且弱。

热轧

1·The results showed that the developed hot rolling technology features the high stability and reliability.

实验结果表明，开发的热轧轧制生产工艺具有较高的稳定性和可靠性。

2·Pipe manufacturing process consists of the following stages: hot rolling, where blank gets cut, heated and rolled till it becomes of the needed size and form.

管道的制作流程由以下几步组成：热轧，在这一步坯料被切割、加热、轧制直到尺寸和形状达到要求为止。

3·Big ferrites and hot rolling texture are left behind in particle structures, Which leads the anisotropy of mechanics, so the tensile strength and elongation rate reduce.

含有粗大的铁素体晶粒和残留的热轧织构，引起力学性能的各向异性，导致了抗拉强度和延伸率的降低。

4·Hot rolling is the key factor for controlling transverse thickness difference, especially edge drop, of non - oriented silicon steel.

热轧是控制无取向硅钢成品横截面厚差偏大、尤其是边部减薄显著的关键工序。

5·According to the photographic principle for on-line measurement of the diameter of hot rolling bar, a new method is introduced.

阐述了摄象法实现热轧圆钢的直径在线检测原理。