全部

1·The mute rocker arm, less noise.

静音摇臂支撑结构，噪声更低。

2·The finished rocker arm brackets.

成品摇臂括号。

3·We can offer rocker arm used for tractor.

我们能提供摇臂用于拖拉机。

4·Install the hydraulic tappets and rocker arm.

安装液压挺杆和摇臂。

5·Some castings, such as crankshaft, rocker arm et al were produced.

已浇注了曲轴、摇臂等铸件。

6·One of the heads with rocker arm brackets and spark plugs installed.

其中一名负责人与摇臂括号和火花塞安装。

7·D. Draw lines on the door frame according to the auxiliary rocker arm.

按闭门器的副摇臂在门框上画线。

8·The push rod, as it is lifted, causes the end of the rocker arm to move up.

当推杆升起时，摇臂的端部向上移动。

9·The CAM follower rides against a push rod, which pushes against a rocker arm.

凸轮挺杆推动控制摇臂的推杆。

10·Photo 1 shows the rocker arms with the rocker arm pins and ball bearings installed.

图片1显示了摇杆武器与摇臂引脚和球轴承安装。

摇臂

1·One of the heads with rocker arm brackets and spark plugs installed.

其中一名负责人与摇臂括号和火花塞安装。

2·The EPG (two jaw) and ETG (three jaw) parallel gripper lines utilize a double acting piston and rocker arm design.

在“电子节目指南”（两个下巴）和“ETG的”（三下巴）爪平行线利用了双动活塞和摇臂的设计。

3·Install the hydraulic tappets and rocker arm.

安装液压挺杆和摇臂。

4·This setup shows the radius on the end of the rocker arm brackets being cut using the rotary table.

这表明，半径设置的结束摇臂括号被削减使用转盘。

5·The finished rocker arm brackets.

成品摇臂括号。