全部

1·Green color. Core wire with 60 GMS zinc coating.

绿颜色。芯线与60大湄公河次区域锌涂层。

2·A zinc coating is applied to the steel for rust protection.

镀锌层是用来防止钢铁生锈的。

3·Progress of molybdate passivating for zinc coating is stated.

本文综述了国内外镀锌层钼酸盐钝化的研究概况。

4·With the increase of temperature, the weight loss of zinc coating increases.

且随着温度的升高， 镀锌板的锌层脱落量增加。

5·Zinc coating, or galvanizing, is a cheap and effective method of protecting steel from corrosion.

锌层或镀锌是一种最经济最有效的防止钢板腐蚀的方法之一。

6·The zinc coating at the outside of the bent or formed section is visible at 25 power magnification.

或成型区在25 倍放大时可看见镀锌层片状材料脱落或裂化，认为锌镀层已损坏。

7·Galvanized sheet is readily spot- or seam-welded, but arc gas welding will boil off the zinc coating.

镀锌板上有焊点或焊缝，但是电弧焊会烧掉锌层。

8·Other inspectors can also be adjusted by the amount of zinc coating to get the thickness of the coating.

别的查验人员也可经过镀层锌附着量进行换算得到镀层的厚度。

9·Zinc coating was prepared using mechanical plating technology for the deposition of small amount tin salt.

采用少锡盐沉积机械镀锌工艺制备了机械镀锌的镀层。

10·The smaller of the size of zinc dust, the better are the uniformity and corrosion resistance of zinc coating.

锌粉粒度越小对应其镀层耐蚀性及均匀性也越好；

镀锌

1·The surface treatment technology is introduced for the high strength, bolt mechanical zinc coating. Specific instructions are provided for general trouble-shooting in the operation.

介绍了高强度螺栓机械镀锌的表面处理工艺，应对生产过程中常遇到问题提出了解决的方法。