全部

1·At last a numerical method to obtain the limit load of structure is given.

最后提出了一种求解结构极限荷载的数值方法。

2·The limit load of local thinning elbow is different from the straight pipe.

局部减薄弯头与直管的极限载荷不同。

3·The failure plane and then the limit load are calculated by overloading analysis.

利用大坝超载分析寻求破坏面，从而得出破坏的极限荷载。

4·Moreover, these limit load formulae can provide reference for the engineering designeers.

所给出的极限载荷公式可供工程设计人员参考。

5·The approximate formula for limit load is found when the fraction angle is less than the half conical one.

在摩擦角小于半锥角的情况下，给出了极限承载能力的近似计算公式。

6·Coupling beams' yielding load and limit load also was enhanced when more diagonally reinforcement was included.

连梁的屈服荷载和极限荷载均随纵向钢筋配筋量的增加而增大，随斜筋配筋量的增大亦增大。

7·Design by Rule, Design by Analysis, Elastic Stress Analysis, Limit Load Analysis, Elastic-Plastic Stress Analysis.

按规则设计，按分析设计，弹性应力分析，极限载荷分析，弹-塑性应力分析。

8·In this paper, the method of asymptotc for structural limit analysis is proposed by the high limit theorem for limit load.

本文根据极限荷载的上限定理，提出了结构极限分析的递近法。

9·For simply supported annular plate under linear load, the limit load analysis was investigated by applying unified strength theory.

对于线性荷载作用下外简支环板，引入统一强度理论，进行了极限荷载分析。

10·When the tensile strain reaches the limit load, the force of tension suddenly becomes very small, because clusters structures change.

当拉伸应变达到承载极限，继续拉伸，力突然变的很小，这是因为团簇发生了结构变化。