全部

1·Hot forming is a common method in steel pressure vessel manufacturing.

压制是压力容器封头制造中常见的工艺之一。

2·Lead and organize the operators to conduct the TPM and CIT action within the hot forming workshop.

积极领导并组织本车间员工进行持续改善及设备的自主维护；

3·Simulation of the recrystallized microstructures in hot forming process is a new re-search method.

计算机模拟金属热变形过程中再结晶组织的变化是一种新的变形组织研究方法。

4·This paper mainly introduced the application of hot forming techniques in the forming of car bodywork stamping part.

本文着重介绍了热成形技术在汽车冲压件成形中的应用。

5·Manufactured with seamless links for, at present there is usually used in hydroforming technology and hot forming two.

对于采用无缝管制造三通来讲，目前通常所采用的工艺有液压胀形和热压成形两种。

6·The phase transformation latent heat is introduced into the analysis of temperature field during the hot forming process.

将热成形过程中的相变潜热引入温度场，并进行了有限元分析；

7·And has the high strength plastic, the middle steel wire support hot forming, arbitrary bending deformation characteristics.

内外有高强度塑料，中间有钢丝支撑热压成形，任意弯曲不变形等特点。

8·The principle of an imaging sensor used for on line measurement of workpieces produced by high speed hot forming is presented.

介绍图像传感器对快速热成型工件的外径在线检测原理。

9·The principle of a CCD sensor used for on-line measurement of workpieces produced by high speed hot forming was presented in this paper.

本文介绍了CCD传感器对快速热成型工件的外径在线检测原理。

10·The hot forming process of cannonball body semiproduct is mainly composed of four operations: pressing, punching, ironing, and shell nosing.

炮弹弹体毛坯热精密成形过程主要由压型、冲孔、引伸和收口四道工序组成。