全部

1·Finally, an injection compression mold with a Huff bar structure is taken as an example.

最后，举出了一个带有哈呋条式的注压模具结构。

2·BMW, however, is using a compression mold that can harden CFRP components in just 10 minutes at 100 degrees Celsius (212 degrees Fahrenheit).

然而，宝马公司用的是一种压缩模型，这种模型能在10分钟内以100摄氏度(212华氏度)的温度使这种碳纤维增强塑料制品变硬。

3·New structure of compression molding mold was designed and manufactured, and the long term test was developed on the original cap making machine.

开展了新结构压塑成型模具的设计、制造工作，并在原制盖机上进行了长期试验。

4·Like compression molding, this method is used to form thermoset materials and involves permanently curing the plastic in a mold under heat and pressure.

像压缩成型，使用这种方法，形成热固性材料和涉及永久固化塑料模具在高温下和压力。

5·Design of compression mold and manufacture methods of power supply plug-in socket are introduced separately. This mold adopts the structure including one cavity per mold.

本文介绍了电源插座压制成形模具的设计与制造方法，该压制模采用一模一腔的结构。

6·In the method of feeding the molten resin mass, the pressure in the cylindrical transfer guide is set to be higher than the pressure in the female mold for compression molding.

另外，根据本 发明的熔融树脂块的供给方法，设定成筒状移送引导件内的压 力大于压缩成形用阴模内的压力。

7·This paper mainly introduces the compression molding equipment including compression press and compression molding mold. The processing parameters of compression molding were also briefed.

主要介绍模压成型的设备（包括模压机和模具），并简述模压成型的工艺参数。

8·Through analyzing the process, the author has offered the idea about designing the compression mold in sheet pre-curved rolling process, key points in the structure and working procedures;

通过工艺分析，给出了板料预弯卷圆压形工序中压形模具的设计思想、结构和工作过程的设计要点。

9·Unlike compression molding, however, transfer molding includes heating the plastic to a fluid state before it gets to the mold and forcing it into a closed mold using a hydraulically actuated plunger.

与压缩成型，但是，传递模塑包括取暖的塑料流体之前得到国家的模具，并迫使它变成一个封闭的模具采用液压驱动柱塞。

10·Gas Burn is a Degradation of the Part Caused by the Compression and Ignition of Trapped Air or Gasses in the Mold.

气体灼伤是一种降解现象，困在工模内的空气或气体因被压缩而燃烧。