全部

1·Yes, I have double checked the moulding material specification.

是正确的，我查过了它的材料物性表；

2·The material choice, moulding method, joint principle and shape design of hinge joint, hasp joint, clamp joint and press fit joint of normal plastics were introduced.

介绍常用塑料铰链联接、搭扣联接、卡夹联接、压力装配联接的联接件材料选择、成型方法、联接原理、形状设计等。

3·This paper briefly introduces the material selection, structural design and moulding process of composite blades for giant wind power turbines.

本文对大型风力发电机复合材料叶片的材料选择、结构设计和成型工艺作了简要的介绍。

4·The fibre orientation of short fibre reinforced complex material in injection moulding was summarized.

阐述了短纤维增强复合材料在注射成型中纤维的取向问题。

5·Raw bamboo fibers reinforced polylactide biodegradable material was prepared by means of non-woven method and moulding pressing technology.

以竹原纤维、聚乳酸为原料，采用非织造结合模压成型工艺制备了完全可降解材料。

6·The pneumatic moulding is a very complex mechanical process with the features of fast impact, discrete materials, combined geometrical and material nonlinearity.

空气冲击湿砂造型过程有着本身的特点：快速冲击，离散的材料体系，材料非线性和几何大变形并存，是一个非常复杂的力学过程。

7·Blow moulding is a process used to make hollow plastic parts which involves heating the material and then forming it into a mould using air pressure.

吹制模制是一种用来制造中空塑料部件的工艺，将材料加热，然后用空气压力使它在模子中成型。

8·Understand the material for moulding and foundry.

了解造型和铸造材料。

9·The influences of processing parameters, material properties and screw design on melt temperature distribution in reservior during injection moulding are described in this paper.

本文叙述了注射成型中加工参数、物料性能及螺杆结构对存料区熔体温度分布的影响。

10·The key basic technology in full mould casting process includes: material and formation of pattern, coating, vibratory fill of moulding sand as well as molten metal filling.

实型铸造法的关键基础技术包括：模样的材料及成形、涂料、型砂的振动充填、金属液的充填。