全部

1·The script USES WLAN tools and utilities to configure device driver parameters like WEP keys and SSIDs.

这个脚本使用WLAN工具和实用程序来配置设备驱动程序参数，例如WEP关键字和SSID。

2·Device Configuration Assistant, or shortly DCA, is used to add, remove and configure device drivers necessary to boot a machine up.

设备配置助手，简写为DCA，用来增加、删除和配置必要的设备驱动来引导一台机器。

3·When first setting up your systems, start from the bottom (the physical layer) as you configure your disk, the device layer, its logical volumes, file systems, and the files and application.

在第一次设置系统时，对于磁盘的配置，可以从最底层(物理层)开始，然后是设备层、逻辑卷、文件系统、文件和应用程序。

4·Configure DMMP to support the storage device.

配置DMMP，使之支持存储设备。

5·As with any search project, our faceted navigation demo requires that we define content sources and configure a crawler or other device to ingest and index them.

对于任何搜索项目，分面导航演示都要求定义内容源，配置收集这些内容源并为它们建立索引的信息收集器或其他设备。

6·The SCSI commands involve data commands that are used for transferring data from or to SCSI devices and non-data commands that request or set the configure parameters of a SCSI device.

SCSI 命令涉及到用于向 SCSI 设备传输数据（或从中输出数据）的数据命令，以及用于设置 SCSI 设备的配置参数的非数据命令。

7·Configure and ensure the boot list is pointing to the standby BOS as the first boot device, as shown in Listing 17.

配置并保证启动列表将备用BOS作为第一启动设备，如清单17所示。

8·If an IP was accidentally configured on this physical interface and it was part of a SEA configuration, the SEA may fail to configure as the physical device is already in use.

如果在这个物理接口上配置了IP，而且它属于SEA配置，SEA的配置就可能失败，因为这个物理设备已经在使用了。

9·There are a number of ways to configure MQ in order to send messages to a device queue manager.

为了将消息发送到设备队列管理器，有许多配置MQ的方式。

10·The global options set the use of UDP, the UDP port, and configure the name of the virtual device that will be created.

全局选项设置使用UDP、udp端口，并配置将要创建的虚拟设备的名称。