全部

1·With this evaporative cooling approach, the mold temperature is automatically evened out.

与此蒸发冷却的方法，具温度是自动，最终列。

2·This series of products are mainly used to control automatically plastics mold temperature.

该系列产品主要用于塑料模具的自动恒温控制。

3·Proper decrease in pouring temperature and increase in shell mold temperature are helpful to preventing hot tear.

为避免产生热裂应适当降低浇注温度，提高型壳温度。

4·Our results show that mechanical properties of PP samples strongly depend on the melt temperature and mold temperature.

实验结果表明，熔体温度和模具温度对试样的力学性能有重要影响。

5·JTH series water type mold temperature control machine is mainly applied to the mould heating and constant temperature.

JTH系列水式模具控温机主要应用于模具的加热与恒温。

6·JTL series water type mold temperature control machine is mainly applied to the mould heating and constant temperature.

JTL系列水式模具控温机主要应用于模具的加热与恒温。

7·The mold temperature obviously influences the molding process, while the melt temperature influences comparatively less.

模具温度对成型过程的影响较大，熔体温度的影响相对较小。

8·The mold temperature is controlled effectively by controlling the flow of the external coolant through the heat exchanger.

具温度是有效的控制，通过控制流通的外部冷却水通过换热器。

9·The higher the pouring temperature and initial mold temperature are, the larger the plastic strain while the smaller the thermal stress is.

浇注温度和砂型初始温度越高，热节处粘塑性应变越大，而热应力越小。

10·Process window analysis, another part of mold flow analysis, examines melt temperature, mold temperature, injection pressure, and fill times.

加工窗口分析、它零件的模流分析，检查熔体温度、具温度、塑压力和充填时间。