全部

1·BOOST pump, an electrically operated fuel pump for fuel supply from the airplane fuel tank to the fuel manifold.

增压泵，从飞机油箱向总油管提供燃油的电动泵。

2·Magneti Marelli Automotive Components (Wuhu) Co. , Ltd. setting up in 2003, main products include Plastic fuel manifold, Intake manifold, Throttle bodies, Autolamp such high-tech products.

2003年，马瑞利汽车零部件（芜湖）有限公司在安徽芜湖成立，其主要产品为塑料进气歧管、喷油嘴、选速器和车灯等高新技术产品。

3·Injecting fuel directly into the engine (rather than into the inlet manifold, upstream of the inlet valves) also has beneficial effects.

燃油直喷到引擎(而不是到进气总管、进气阀门的上边)也有有益效果。

4·The fuel system only has several major parts such as fuel tank, fuel pump, fuel filter, carburetor, intake manifold, etc.

燃料系只有这样几个主要部件，如燃油箱、输油泵、燃油滤清器、化油器、进气歧管等。

5·The fuel system consists of the fuel tank, fuel pump, fuel filter, carburetor, intake manifold, and fuel lines, or tubes, connecting the tank, pump, and carburetor.

燃料系统包括汽油箱、汽油泵、汽油滤清器、化油器、进气歧管以及连接油箱、油泵和化油器的油管。

6·In the P0442 example above, the fuel level, intake air temperature and manifold absolute pressure sensors are used.

在上面所给出P 0442示例中，燃油箱液面位置，进气空气温度和歧管绝对压力传感器将被应用。

7·A very good and practical solution to this problem is if you invite the fuel suppliers to draw their sample through your own vessels drip sampler at your vessels manifold.

针对这个问题，一个非常好且可行的解决方法就是邀请并说服加油方通过你船燃油总管上的滴注取样器进行取样。

8·DO invite the fuel supplier to carry out his sampling at your vessels manifold through your own vessels drip sampler.

一定要邀请加油方在你船的燃油总管用你们自己的滴注取样器进行取样。

9·The intake manifold pressure is lower when the cranking speed increases, thus the fuel metering strategy should be modified.

随着拖动转速升高，进气歧管压力降低，对应的喷油策略也应随之调整；

10·PC032 Pressure Sensor: It can test manifold absolute pressure of diesel engine, provide the signal to ECU, then control the lasting time of the fuel injection.

PC032压力传感器：用于柴油发动机进气歧管内绝对压力的检测，向ECU（电控单元）提供信号，实现对发动机喷油持续时间的控制。