全部

1·Caulk a pipe joint; caulked the cracks between the boards with mud.

堵住水管接头的缝隙； 填塞木板和泥之间的''。'缝'。''。

2·The paper was about researching and developing water pipe joint ring.

主要介绍了水管接头密封圈(水封)的开发研制过程。

3·The Floormen apply proper pipe dope into the thread box of the pipe joint.

钻工用合适的丝扣油涂抹接头母扣。

4·Therefore also widely used in thin-walled package of casting, such as pipe joint, fittings etc.

因此也广泛用于薄壁件的铸造，如水管接头、管件等。

5·The aluminum-plastic pipe joint is applicable to the connection and installation of the aluminum-plastic pipes.

本实用新型适 用于铝塑管的连接和安装。

6·After the adhesive is solidified, the pipe and the pipe joint body are screwed into a whole through the screw plug.

待粘接剂固化后，管子、管接头体通过螺丝堵头凝接成一个整体。

7·Mechanical property and microstructure of T91 steel pipe joint with TIG welding on different high-temperature test process was researched.

采用不同的高温试验工艺对T91钢管的TIG焊接头进行处理，分析TIG焊接头在力学性能和显微组织上的差异。

8·Components, such as pipe joint sealed well, in order to prevent the air intrusion, thus control air-pocket and the occurrence of cavitation.

管接头等元件的密封要良好，以防止空气侵入，从而控制气穴与气蚀的发生。

9·The result showed that the proliferation of carbide decided microstructure and mechanical property of T91 steel pipe joint with TIG bonding.

结果表明：碳化物的扩散决定了T91钢管TIG接头力学性能和显微组织。

10·The groundwater level above pipe bottom and anti-infiltration of pipe joint are the decisive factors affecting the groundwater infiltration rate.

管底以上的地下水位和管道接口的防渗施工质量是地下水渗入量大小的决定性因素。