全部

1·An insulating layer is formed above the conductive underlayer.

在导电下层上形成绝缘层。

2·This occurs when solvents get trapped in the underlayer of a finish.

这种现象发生是因为溶剂被困在里面不能正常挥发。

3·Finally, we discuss the interaction between head and medium with the soft magnetic underlayer.

再者分了软磁衬底存在时，磁头与介质的相互作用。

4·The design of replacement underlayer thickness is crucial to the replacement method of ground treatment.

换土垫层厚度设计是换填法地基处理设计的关键。

5·A magnetic head includes a wafer substrate and a conductive underlayer formed directly on the substrate.

一种磁头包括直接在衬底上形成的晶片衬底和导电下层。

6·Pattern transfer technique is used to transfer photoresist microlens arrays into the polymer underlayer.

通过反应离子刻蚀可以将光刻胶微透镜图形转移至这种高性能的聚合物材料上。

7·Therefore, TCP and the underlayer protocols should be optimized and improved to be suit to the wireless mobile network.

因此，TCP协议以及下层协议在无线移动网络中应用时需要进行优化和改进。

8·The results show that the middleware we developed can mask underlayer complexity and help users to improve the performance of their programs.

从测试结果可以看出，该中间件可以有效地屏蔽网格计算环境的底层复杂性，并提高运行性能。

9·It should also help in the prediction of avalanche risk, because snow slips are often the result of dense snow falling on a less-dense underlayer.

该研究也可以帮助预测雪崩的风险，因为雪层的滑落通常是因为较密实的雪层覆盖在较松软雪层上的结果。

10·The intercrossing method in repairing old metal pipes usually USES pipe-class high density polyethylene (HDPE) as lining plastic-underlayer pipes.

穿插法修复金属旧管道通常使用管材级高密度聚乙烯(HDPE)作为塑料内衬管。

下层

1·Therefore, TCP and the underlayer protocols should be optimized and improved to be suit to the wireless mobile network.

因此，TCP协议以及下层协议在无线移动网络中应用时需要进行优化和改进。

2·Take underlayer redness deposition of hybrid, respectively use toluene, water and ethanol to rinse at least 1 time, then obtain final product product organic polymer microsphere.

取所得的混合物的下层红色沉淀，分别用甲苯、水和乙醇反复清洗至少1遍，即得到最后目标产物有机高分子微球。

3·A magnetic head includes a wafer substrate and a conductive underlayer formed directly on the substrate.

一种磁头包括直接在衬底上形成的晶片衬底和导电下层。

4·An insulating layer is formed above the conductive underlayer.

在导电下层上形成绝缘层。