全部

1·The formulation and technology of nitrocotton organic film on the second-stage screen in two-stage series IR image converter tube are described.

论述红外二级串联变像管第二级屏工艺中硝棉有机膜的配方及工艺。

2·Image converter tube camera applied firstly to study changing process of profile diameter of electron beam produced by injector of accelerator is presented.

介绍了变像管扫描相机对直线感应加速器注入器中的电子束束剖面直径的应用。

3·Step five: tune the final stage power transistor quiescent current, the current value of the power tube by measuring the voltage of the emitter resistance Converter and get.

第五步：调末级功率管的静态电流，该电流值可以经由过程测功率管的发射极电阻的电压换算而得到。

4·The position of the sleeves is located in the middle between the arrowheads on the connector tube and the two circumferential grooves on the socket piece of the catalytic converter.

连接套位于接头管上的箭头与催化转化器套筒上的两个圆周凹槽的中心位置。

5·The high voltage endurance test device for switch tube is composed of high voltage pulse generator, high voltage breakdown detector, trigger, auto-controller and DC/AC converter.

开关管冲击耐压装置由高压脉冲产生器、击穿检测器、触发器，及自动控制器、DC/AC 变换器等构成。

6·It also presents the new combined technology of JL cold tube type ammonia converter internals and isobaric synthesis.

同时，介绍了JL冷管型氨合成塔内件和等压合成综合新技术。

7·Venturi tube is one of key equipments in process of purification and recovery of converter gas, which is used to drop temperature of converter gas with spraying jet fixed at throat of Venturi tube.

文氏管内部的流动与传热较为复杂，不仅涉及喷淋液滴与烟气在流动过程中的相互作用，而且涉及喷淋液滴遇到高温烟气发生相变进行的传热传质。

8·The automatic automatic welding dual - phase stainless steel reaction tube and tube sheet on methanol converter is introduced.

介绍甲醇合成塔双相不锈钢反应管与管板的自动焊接工艺。

9·From 1773 K to 1973 K, the reduction experiments of converter slag simulated for slag splashing by silicon were carried out in a vacuum graphite tube resistance furnace.

在1773 ~ 1973 K温度范围内，满足溅渣护炉的炉渣条件下，在真空碳管电阻炉中对转炉渣进行了硅热还原实验研究。

10·The plunger is helically grooved along its length and a converter translates rotation of the handle into linear motion of the plunger, thereby advancing the plunger within the tube.

所述柱塞沿其长度形成螺旋槽，并且转换器将所述手柄的旋转转化为所述柱塞的线性移动，由此使所述柱塞在所述管道内前进。