全部

1·The wheel and axle is really a sort of lever.

轮轴实际上是一种杠杆。

2·Aim To realize optimized construction and volume of rail wheel and axle in complex loads with finite element analysis.

目的通过对火车轮轴在复杂载荷作用下的有限元分析，实现火车轮轴结构与体积的优化。

3·The wheel and axle of the Han Dynasty are an important subject of study for the history of Chinese science and technology.

汉代的轮轴工艺，是中国古代车制研究的重要内容，也是中国科技史上的重大课题之一。

4·Optimized design of rail wheel and axle is finished. Conclusion This result satisfies our national railway standard. The maximum stress is less than the yield stress.

结论实现火车轮轴的优化设计，优化后轮轴的最大应力均小于屈服应力，满足我国铁路的标准要求。

5·With a unique 2-piece joint between the axle and the wheel, the same extreme wheel turning angle is divided into two shallower angles without joint binding.

一个独特的2片联合之间的车轴和车轮，同样的极端车轮转角分为两个较浅的角度而不联合约束力。

6·Place riding-type stresses on the wheel by squeezing spokes or rolling the wheel while holding the axle and pressing down.

地方骑式上强调了车轮辐条受挤压或滚动的车轮，而持有的轴和紧迫。

7·The length of the wheel axle was also unified and expressways standardized to ease transportation throughout the country.

长度的轮轴也统一和标准化，以减轻公路运输在全国各地。

8·Drive shaft a drive shaft and universal joints connect the transmission to the rear drive axle on most rear-wheel-drive vehicles.

传动轴在大多数后轮驱动的车辆中主要是靠传动轴和万向节连结着变速箱与后轮驱动桥。

9·The paper reviews the process from ring chain type bucket elevator to plate chain bucket elevator and indicates the strength calibration of driving wheel axle.

本文重点论述了环链式斗式提升机改造成板链式斗式提升机的过程及驱动轮轴的强度校核。

10·The wheels swivel on each end via a pivot arrangement between the axle and the wheel spindle.

通过装在轮轴和车桥之间的驱动轴，两端的车轮可以转动。

轮轴

1·The wheel and axle of the Han Dynasty are an important subject of study for the history of Chinese science and technology.

汉代的轮轴工艺，是中国古代车制研究的重要内容，也是中国科技史上的重大课题之一。

2·Aim To realize optimized construction and volume of rail wheel and axle in complex loads with finite element analysis.

目的通过对火车轮轴在复杂载荷作用下的有限元分析，实现火车轮轴结构与体积的优化。