全部

1·The handle (1) is a semi-circular ring or an arc.

所述的手柄（1）设置为半圆环或者 设置为弧形边。

2·The method of counting for circular ring objects in frequency domain is proposed.

研究了用频域法实现圆环形目标物计数的方法。

3·Its shape was obtained by installing a circular ring at the confluence point of two conical revolutions.

在两个圆锥形旋转的交汇点安装一个圆环就构成了楼梯整体的基本形状。

4·The cylindrical shell, reinforced with non-uniform circular ring-frames, is a new structure of submersible pressure hulls.

本文应用能量法推导了一种新型的潜水器耐压壳结构——非匀加肋圆柱壳总失稳压力的计算公式。

5·But the arithmetic product operation is needed to determine a pixel belonging to which circular ring, which consumes much time.

但由于确定各像素点属于哪一个圆环需要进行复杂的乘积运算，耗费了大量时间。

6·A permanent magnet with a wide pole arc circular ring structure is arranged on the rotor and fixed with a non-magnetic thin-wall outer ring.

转子上装有宽极弧圆环结构的永磁体，永磁体用非磁性的薄壁外圈固定。

7·In this paper, a method to determine the specific contact resistance of metal-semiconductor contact — circular ring structure method is presented.

本文中提出了一种测量金属-半导体欧姆接触比接触电阻的新方法-圆环结构测试法。

8·This paper introduces two analytical methods for computing the stress in Cribs of steel circular ring, one is approximate method the other is exact.

本文介绍两种钢围令环内力的计算方法即近似法和精确方法。

9·Combining practical matters, a method of the stress calculation of circular ring plates under press loading using flat circular plates formula was introduced.

本文结合实际问题，给出了利用《应力应变公式》中的等厚平圆板公式对受压环板应力的理论计算方法。

10·The flexural vibration of a circular ring that is of axis symmetry is analyzed and calculated, the solid frequency expression of the flexural vibration is obtained.

对一类轴对称圆环的面内弯曲振动进行了分析计算，给出了圆环面内弯曲振动固有频率表达式。

圆环

1·Its shape was obtained by installing a circular ring at the confluence point of two conical revolutions.

在两个圆锥形旋转的交汇点安装一个圆环就构成了楼梯整体的基本形状。

2·But the arithmetic product operation is needed to determine a pixel belonging to which circular ring, which consumes much time.

但由于确定各像素点属于哪一个圆环需要进行复杂的乘积运算，耗费了大量时间。

3·A dynamic response of circular ring in different supported conditions under impact load is investigated by a dynamic photoelastic method in this paper. Some experimental results are presented.

本文用动光弹方法研究冲击载荷下不同支撑条件的圆环的动态响应，给出部分实验结果。

4·An experimental study of inlaid circular ring under impact force on interior boundary is also conducted. The result shows that the stress is distributed in a limited scope.

文中还对内边界受冲击力作用的镶嵌圆环进行了动光弹实验，结果表明，应力分布局限在有限范围内。

5·In this paper, a method to determine the specific contact resistance of metal-semiconductor contact — circular ring structure method is presented.

本文中提出了一种测量金属-半导体欧姆接触比接触电阻的新方法-圆环结构测试法。