全部

1·The rheologic parameters are mainly influenced by gas liquid ratio and base mud properties.

流变参数主要受气液比和基浆性能影响。

2·It is used to produce high gas-liquid ratio oil Wells or for unloading liquid in gas Wells.

柱塞举升适用于高气液比油井生产和气井的排水采气。

3·The solid to liquid ratio was introduced to represent the solid like phase growing in the film. Th...

采用固液比作为类固态与类液态的比例指标，发现等效粘度的上升是薄膜流体类固化造成的。

4·Analyses parameter have inclined Angle, pipe diameter size, gas liquid ratio and friction factor and so on.

分析参数有：倾斜角度、管径大小、气液比和摩阻系数等。

5·Dynamic evaluation included the effects of temperature, concentration, nitrogen-liquid ratio and permeability on foaming sealing ability.

动态性能评价实验包括温度、发泡剂浓度、气液比、渗透率对泡沫封堵能力影响实验。

6·The effects of mud concentration, gas to liquid ratio and the hydraulic resident time on the removal rates of COD and NH3-N were investigated.

实验考察了污泥浓度、气液比及水力停留时间对生物降解废水中COD和氨氮(NH3 - N)的影响。

7·RESULTS: the amount of adsorbed iodine onto chitosan was related to the concentration of iodine, the immersing time and the solid to liquid ratio.

结果：壳聚糖吸附碘量与浸液中的碘浓度，浸渍时间和固液比有关。

8·The solid to liquid ratio was introduced to represent the solid like phase growing in the film. The results show that solidification of the ultra...

采用固液比作为类固态与类液态的比例指标，发现等效粘度的上升是薄膜流体类固化造成的。

9·Result: the primary factor which influenced the extraction rate was grinding degree, then it was time of distillation, solid-liquid ratio and soaking time.

结果：影响挥发油得率的主要因素为粉碎度，其次为蒸馏时间和料液比，最后为浸泡时间。

10·The effects of the return sludge ratio and the return mixed liquid ratio on the removal of nitrogen and phosphorus were studied in the modified A2/O process.

重点介绍了坂雪岗污水处理厂的复合改良A2/O工艺的运行方式及除磷效果，并分析了实际运行中存在的问题及工程设计时的注意事项。