全部

1·Good for: Foam board, Low MDF and so on.

适合：泡沫板，低密度板，发泡板等。

2·Turn the screw eyes firmly into the foam board.

把螺丝眼睛坚定地进入泡沫板。

3·Industrial designers sketch and create rough prototypes from foam board and other materials.

工业设计者会拟出草图，用泡沫板和其他材料创建出粗略的原型。

4·This article introduced basic property, process route and current situation in China of PS extruded foam board as insulation material.

本文介绍了PS挤塑泡沫板作为保温材料的基本性能，加工工艺路线以及在我国的现状。

5·Especially EPS foam board, XPS bubble board of flame resistant is poorer, in 80 degrees Celsius above will melt deformation and drop off.

特别是EPS泡沫板、XPS泡沫板的耐火性较差，在80摄氏度以上就会熔融变形并滴落下来。

6·You can also make PVC foam board, PVC ceiling, PVC pipes, PVC baseboard and threading pipe, cable insulation, plastic doors and windows, plastic bags and so on.

也可以制作PVC发泡板，PVC吊顶，PVC水管，PVC踢脚线以及穿线管，电缆绝缘，塑料门窗，塑料袋等方面。

7·With an approach of combination of thermal rising test of cubic block in-situ and back analysis, the thermal retardation capability of polystyrene foam board is analyzed.

采用施工现场混凝土立方体非绝热温升试验和反演分析相结合的方法，对聚苯乙烯泡沫塑料板外贴法的保温能力进行分析研究。

8·Adding some foam onto the backside of the board and a coat of paint on the front will make the board more effective and attractive.

在这个板子的后面加些泡沫和在前面涂一层漆使得这块板子更加有效和美观。

9·The ramps are a potential source of foam loss that could damage the shuttle, but the flight-readiness review board decided the current design is not risky enough to delay the upcoming mission.

在这些斜面上可能会发生损害航天飞机的泡沫脱落，但航天飞机准备情况审议会与会人员断定，目前的设计可能带来的风险不足以推迟这次航天任务。

10·Mount a dry-erase board and a plastic bin on the inside of a cabinet door with double-sided foam mounting tape.

用双面胶在橱门里面安装一块白板和一个塑料收纳箱。