全部

1·One end is a plane mirror, the other is a metal mesh.

谐振腔一端为平面反射镜，一端为金属栅网。

2·The image and material object of plane mirror are simultaneously photographed on negative.

把平面镜的映像和实物同时拍摄成底片。

3·This is certainly true for a plane mirror but it is only approximately the case for other configurations.

对于平面镜这肯定是对的，但是对于其它形状的反射镜则情况只是近似如此。

4·The theory and the experiment can prove that on a certain condition a plane mirror also could produce real images.

理论和实验都可以证明，在一定条件下，平面镜能够生成实像。

5·The image formed by a plane mirror has the same size as the object. it is also equally distant from the mirror as the object.

利用平面镜观看镜像，镜像的大小与物体相同，并且两者与镜面的距离相等。

6·Adopting spherical mirror and plane mirror can notablely improve the utilization of the light source in the system of light source.

在光源系统中采用球面聚光镜和平面反射镜，可大幅提高光源的利用率。

7·Second, it could not remove image distortion: except plane mirror, other kinds had more or less image distortion phenomenon, especially the spherical mirror.

球面镜、双曲率镜面或其他镜面，虽然视角和后视范围扩大，但仍然无法根除视觉盲区。

8·To an observer standing in front of a plane mirror the image formed has always the same size as the observer. it appears smaller only because it is farther away.

观察者利用平镜所看到的镜像与观察者的大小相同，只是由于镜像距离较远，所以看来较小。

9·Their functions can substitute for some uses of large diameter plane mirror, 0.2light pipe, major diameter light pipe, arch type detector, T type detector and so on.

本文所介绍的平行度检测仪可以取代大口径平面镜，0.2秒平行光管、大口径平行光管、拱形检测架、T型检测架等大型检测仪器的某些使用功能。

10·A novel solar illumination system consisting of strip plane mirror array collecting sunlight, light pipe, coupling mirror and grinded plastic tray scattering light was introduced.

提出一种采光面积大、结构简单、制作容易、维修方便的平面反光镜阵列汇聚采光，导光管传光，平面镜耦合，磨砂塑料盘散光的新型太阳光照明系统。

平面镜

1·The image and material object of plane mirror are simultaneously photographed on negative.

把平面镜的映像和实物同时拍摄成底片。

2·Their functions can substitute for some uses of large diameter plane mirror, 0.2light pipe, major diameter light pipe, arch type detector, T type detector and so on.

本文所介绍的平行度检测仪可以取代大口径平面镜，0.2秒平行光管、大口径平行光管、拱形检测架、T型检测架等大型检测仪器的某些使用功能。