全部

1·Accident in cargo tank.

货油舱内有事故。

2·Physical property of asphalt and two different forms of cargo tank are introduced in the article.

沥青船液货舱是沥青船设计、制造以及管理的关键。

3·Are all cargo tank atmospheres at positive pressure with an oxygen content of 8% or less by volume?

所有液货舱大气是否维持正压，且其含氧量以体积计低于8% ？

4·An analysis of the effects of the structural forms of liquid cargo tank on sloshing has been performed.

本文就不同液舱结构形式对晃荡所产生的影响进行了分析研究。

5·Are cargo tank relief valves set correctly and actual relief valve Settings clearly and visibly displayed?

货舱安全阀的设定位置是否正确，安全阀实际定位的显示是否清楚和直观？

6·Grasping the temperature distribution of cargo tank during the pre-cooling is the basis of making a safe and economic pre-cooling plan.

掌握液舱温度在预冷过程中的变化规律是制定安全经济的预冷方案的基础。

7·Where only one level gauge is fitted it should be arranged so that any necessary maintenance can be carried out while the cargo tank is in service.

如果仅设置一个液位仪，则应布置成液货舱处于营运状态下能对其进行任何必要的维修。

8·A travel point pressure switch (8.1) is arranged on the two-position five-way valve (8) and arranged at the bottom of the vehicle body or the cargo tank body.

两位五通阀（8）上有行程点压开关（8.1），行程点压 开关（8.1）置于汽车车厢或货罐体底部。

9·This paper recommends the welding technology of chemical ship's cargo tank to be installed with bracket in ferritic-austenitic stainless steels and some points that should be paid attention to.

介绍化学品船液货舱双相不锈钢肘板焊接的工艺要求及注意事项。

10·When carrying on sea water washing, the thermal oil system serves thermal oil to cargo oil tanks, other tanks and the tank washing heater.

进行海水洗舱时，热油系统为货油舱及其他舱室和洗舱加热器提供热油。