全部

1·The reaction took place in the fixed bed reactor. By using steady state model, each step kinetic parameter in the reaction net was acquired.

反应是在固定床的条件下进行的，通过建立稳态反应模型，求出了异构化反应网络中的每一步动力学参数。

2·They have different kinetic parameter respectly and the ratio of loss of mass in two process is different from mass ratio between PUR and polysilicone in the PUR polysilicone system.

结果表明，改性体系的热分解分两个明显不同的过程进行，两个过程有不同的动力学参数，并且改性体在它们中的失重比与体系中PUR和有机硅的质量比也不相同。

3·The finite diffusion model of CME was established, the activity coefficient ratio, the diffusion coefficient correction factor and the kinetic parameter were introduced and evaluated.

建立了CME的有限扩散理论模型，引入了活度系数比、扩散系数校正因子及动力学参数等。

4·The fracturing parameter characteristics of binary mixture components were studied with the aid of batch grinding kinetic model.

借助于分批磨碎动力学模型，研究了两组分混合物料组分的碎裂参数特性。

5·In this paper a sequential experimental program used for model discrimination and parameter estimation of kinetic models for the high temperature-shift reaction over B109 catalyst is presented.

本文介绍了应用序贯实验设计方法对“B109”型催化剂中温变换反应动力学竞争模型进行模型筛选及参数估计的过程。

6·Through model screening and parameter estimation, a kinetic model of cyclohexane steam reforming reaction is obtained.

通过模型筛选和参数估值，得到了环己烷水蒸汽转化反应动力学模型。

7·The aging kinetic models in the parameter of n-pentane asphaltene is derermined for simply discovering the anti-aging property of regenerated asphalt.

为了能够简捷、直观地揭示、评价再生沥青的老化性能，建立了以正戊烷沥青质为参数的老化动力学模型。

8·The pseudo-first-order kinetic rate constant of each step in the network of hydrocracking of tetralin was evaluated by the nonlinear parameter estimation method.

用非线性参数估计法对四氢萘加氢裂化反应网络的拟一级动力学常数进行了计算。

9·Then parameter of motion is calculated after confirming the kinetic track of the two-degree of freedom stabilized platform.

另外对二自由度稳定平台进行了轨迹规划和生成，推算出平台的运动参数。

10·A 2-dofs lumped-parameter kinetic model of single sector is built in a mistuned bladed-disk system.

建立了失谐叶盘系统单个扇区两自由度集中参数动力学模型。