全部

1·Objective: to study the action for relieving pain and anti-inflammation of Zhongtongxiao spraying agent.

目的：研究肿痛消喷雾剂的镇痛抗炎作用。

2·Objective: To observe the therapeutic effect on perennial allergic rhinitis treated with decoction of Chinese herbs combined with budesonide nasal spraying agent.

目的：观察中药煎服配合布地奈德鼻喷雾剂喷鼻治疗常年性变应性鼻炎的疗效。

3·Spraying must be washed clean appearance, there is oily wax with a agent oil, new welding or metal appearance except rust after use of epoxy resin antirust primer to prevent rust.

施喷外表必定要用水洗洁净，有油质，蜡质要用出有剂出油，新焊接或除铁锈后的金属外表要用——环氧树脂防锈底漆处理以防生锈。

4·Polymer and coupling agent were used to coat phase stabilized ammonium nitrate (PSAN) by mens of spraying and drying technology in order to lower moisture absorption of an.

为降低硝酸铵(AN)的吸湿性，采用喷雾干燥技术，用聚合物和偶联剂对相稳定硝酸铵(PSAN)进行改性。

5·The effect of spraying technology of shrinkage reducing agent (SRA) on the drying shrinkage of cement-based materials was studied.

探讨了水泥基材料减缩剂喷涂工艺对水泥砂浆的减缩效果。

6·Influencing of curing time on film hardness is discussed through modifying the ratio of paint and curing agent. The defects from spraying process and the countermeasures are narrated.

通过调整漆与固化剂比例，讨论了固化时间对漆膜硬度的影响，同时论述了喷涂过程中产生的缺陷和采取的措施。

7·The packing of spraying glossy agent is studied in this paper. Selective factor of dissoluble matter and propellant is discussed. By orthogonal experiment the best formulation is given.

文中对喷雾光亮剂的包装进行了研究，论述了内溶物和抛射剂的选择因素，并通过正交实验确定了喷雾光亮剂的最优配方。

8·The influence of added charcoal pore-forming agent and improved plasma spraying parameters on porosity of the anode layer were investigated experimentally.

实验研究分析了添加炭粉造孔剂和改进喷涂工艺参数对阳极层孔隙率的影响。

9·Ceramic tile wall first with the factory production of impervious waterproof agent spraying, brushing and then the FDA can Zhuanfeng.

瓷砖外墙先用本厂生产的抗渗防水剂喷涂，然后用本品涂刷砖缝即可。

10·Matt agent widely used modification of TPR material make it glossy and matt in one of the special effects without spraying (Eliminate flow liner), also can be attained the larger rate of foam.

雾面剂广泛应用于TPR鞋材的改性，无需喷涂就可同时达到亮、雾面于一体的特殊效果（消除流纹），并能获得较大的发泡比率。