全部

1·The analysis of allowable error implies that the allowable error of relational data of database is non-uniform.

数据误差分析显示：关系数据的允许误差是不均匀的。

2·For the macroscopic reservoir parameters, the permeability was enhanced, and the porosity variation was within the range of allowable error.

在宏观参数上则表现为渗透率的增加，储层渗透性变好，而孔隙度变化值在误差允许的范围基本不变。

3·In this paper deduces an aim-functional approximative formula is derived in the range of the allowable error and the simple formula for optimum section is found.

本文在允许误差范围内，导出了目标函数的近似式，并给出了优化截面的简化公式。

4·Then a feature based polyhedral model is reconstructed adaptively, so a large scale precise data reduction, under allowable error, is also realized at the same time.

在此基础上，完成了基于特征的曲面网格自适应构造，实现了大规模点云的精确数据压缩。

5·Base on the equation established, an accurate method is used to determinate the allowable error angles which can make the mechanism realize self adjustment presented.

在建立的自调位移方程基础上，提出了一种确定机构能够实现自调的允许误差角的精确方法。

6·The results show that, its efficiency is higher and allowable error in assembling is increased. The coupling between the single-mode optical fiber with this kind of en…

具有这种形式端面的单模光纤在与光纤耦合中也能得到满意的结果。

7·Except that the systematic error of albumin at low medical decision level exceeded the allowable error, all the other systematic errors at medical decision level were acceptable.

医学决定水平处的系统误差除白蛋白的低值超出允许误差外，其余各检测项目医学决定水平处的系统误差均在允许误差内。

8·As previously noted under Failure Acceptance, the tests ran with an allowable threshold of 5% for error codes returned.

正如在Failure Acceptance下面所注意的那样，测试运行时的错误代码返回容忍门槛为5%。

9·Aiming at these problems, this paper studies how the original error affects the accuracy, works out its allowable values, and finds out the equation between friction of pins and clamping force.

针对这一问题，本文研究了零件加工误差对动模板合模位置的影响，得出了零件加工误差的许用值范围，并计算了由于销轴摩擦力对合模力放大比的影响关系式。

10·Standard grade 1 and grade 2 is given in the precision and accuracy of maximum allowable values, see diagram to explain the specific standard error.

标准中给出了1级和2级精密度和准确度的最大允许值，误差的图解说明具体见标准。