全部

1·The molding of side holes was achieved by using angle pin and spring;

通过采用斜导柱、弹簧等实现了塑件侧孔成型；

2·Since the Angle pin is a typical structural part of the mold, it is necessary to design automatically.

斜导柱是型腔模具中典型的结构零件，对其实现自动化设计很有必要。

3·The thesis presents a practical die structure with dog-leg CAM and Angle pin for secondary combined Angle core pulling of die casting draw hooks.

本文给出了拉钩铸件弯销-斜销二级联合斜向抽芯压铸模实用结构，论述了模具分型面的确定、结构特点和工作原理。

4·The thesis presents a practical die structure with dog-leg cam and angle pin for secondary combined angle core pulling of die casting draw hooks.

本文给出了浮子室体铸件斜销-齿轴-齿条二级联合斜下抽芯压铸模实用结构，论述了模具结构特点和工作过程。

5·The thesis presents a practical die structure with Angle pin and gear shaft and rack for secondary combined inclined down loosing core of die casting hopper bodies.

本文给出了浮子室体铸件斜销-齿轴-齿条二级联合斜下抽芯压铸模实用结构，论述了模具结构特点和工作过程。

6·The thesis presents a practical die structure with angle pin and gear shaft and rack for secondary combined inclined down loosing core of die casting hopper bodies.

本文给出了拉钩铸件弯销-斜销二级联合斜向抽芯压铸模实用结构，论述了模具分型面的确定、结构特点和工作原理。

7·The working principle of the die casting mould has been discussed, and the core pulling force, the core pulling distance and the diameter of the angle pin have been confirmed by calculation.

论述了壳体铸件压铸模工作原理，通过计算确定了抽芯力和抽芯距离以及斜销直径。

8·This is the best working Angle to prepare the notch, drill the tibial tunnel, and initiate the femoral guide pin before fully flexing the knee.

这是准备髁间切迹、建立胫骨隧道、在完全屈膝前放置股骨导针的最佳工作角度。

9·This paper puts forward such methods as increasing yarn twist, optimizing sizing technology, reducing whiff pressure, and enlarging the chief jet nozzle and the angle of yarn stop pin, etc.

针对弹力竹节织物织造过程中的技术难点，提出了增加纱线捻度、合理上浆工艺、减小喷气压力、增大主喷嘴和止纱销的角度等技术措施。

10·Introduced a inner ejection pin in Angle ejector structure that prevent product pulling pulling injury and displacement.

介绍了一种从斜顶内顶杆顶出，防止产品拉伤、位移的基本结构。