全部

1·Pulse counter with manual reset and electric output signal.

有手动复位和电气输出信号的脉冲计数器。

2·The measuring system consists of a pulse amplifier, a rectifier, an integrator, and a pulse counter.

自光电倍增管而下测量系统由脉冲放大、整流、积分和计数器等组成。

3·The digital tachometer circuit, its principle is different from the pulse counter-type instrument, is described in this paper.

介绍了一种其电路原理与脉冲计数式仪表不同的数字转速表电路。

4·When using pulse counting method, the precision of pressure-measuring with vibrating-wire sensor is influenced by the precision of pulse counter, circuit noise, temperature compensation, etc.

应用振弦式传感器并基于脉冲计数法进行压力测量可达测量精度受脉冲计数精度、电路噪声及温度补偿等多重因素影响。

5·They are the analog counter, programmed to calculate pulse.

它们是模拟计数器，经编程后可以计算脉冲。

6·Pulse signal of proportional amplifier is sent to counter after reduced noise by window voltage comparer.

经比例放大器放大后的脉冲信号经窗口电压比较放大器消除干扰给计数器。

7·The counter output, which represents a binary number, decreases by 1 any time the counter is triggered by a pulse .

每当计数器被时钟脉冲触发一次时，计数器输出的二进制数便累减1。

8·To use the way of put a driven circuit behind the pulser, lead through the input of count clock pulse, can avoid the irregular date on the counter during experiment effectively.

在脉冲发生器输出端后加一级驱动电路，再接入计数器的时钟脉冲源输入端，可有效地避免通常发生在实验过程中计数器不规则的跳变。

9·In this method the main part of the pulse width is measured by counter, and the odd of the pulse width is measured by time-voltage conversion method.

该方法以计数器法测取脉冲的主体宽度，用时间-电压转换法测取脉冲的零头时间，并以此作为量化误差的校正值。

10·The accuracy control of the motors in Gamma-ray irradiation of blood is realized by means of the inner pulse output code and the high-speed counter in PLC.

通过使用可编程控制器中的专用脉冲输出指令和高速计数器，实现了对辐照仪步进电机的精确控制。