全部

1·The defoamer not only can break foam rapidly, but also restrain foam forming effectively. Water phase system still keeps in its original condition after defoaming.

该消泡剂既有快速的破泡性，又有良好的抑泡性，消泡后水相体系保持原体系状态。

2·The liquid-position sensor working principle of brake-used oil tank, structural design of floater products, mold design, foam material as well as foam forming process are introduced.

介绍了刹车油箱液位传感器工作原理、浮子产品结构设计、模具设计、发泡材料用料、发泡成型工艺等方面内容。

3·The insulating foam prevents ice from forming on the tank when it is filled with 500,000 gallons of supercold liquid hydrogen.

当容器内充满50万加仑的超冷液态氢时，绝缘泡沫可以防止冰在容器上形成。

4·On the new tank, NASA has reconfigured the struts and fittings where foam was prone to peeling off, and installed heaters to prevent ice from forming.

美国宇航局在新的燃料箱上把容易泡沫胶脱落的地方进行了改装，同时安装上了加热器，以防止泡沫胶结冰。

5·The insulating foam prevents ice from forming on the tank when it is filled with 500,000 gallons (1.9 million liters) of supercold liquid hydrogen and liquid oxygen before liftoff.

为什么会脱落呢？ 在航天飞机被发射出去之前，它的外部燃料箱里会装满50万加仑（合190万公升）的极冷液态氢和液态氧。

6·Proteins in beer had greatly influence on the quality of beer, especially the forming of foam and haze.

啤酒中蛋白质对啤酒品质的各方面有着很大的影响，尤其是对啤酒泡沫和浑浊的形成。

7·Foam resistance is strong, not forming foam.

抗泡性强，不会形成泡沫。

8·The characteristic and application of the foam, and the requirement of the forming technology is described in the paper. In the same time, the foaming mold is introduced.

阐述了发泡材料的特点及应用，以及成形工艺要求；同时，对发泡材料成形模具进行了介绍。

9·Pressure builds up in the foam after the components have set. The forming network of stable cell walls prevents the foam from further expanding and the blowing agent from escaping.

当组分设定后压力便在泡沫逐步积聚。形成稳定细胞壁的网络阻止泡沫进一步膨胀和防止发泡剂逃逸。

10·The product is developed aiming at the die-cutting and forming of various insulating materials such as PVC, film, Mylar, copper foil, aluminum foil, foam, ect. In the electronic industry.

本产品主要针对电子产业的PVC、胶片、麦拉纸、铜箔、铝箔、泡棉等多种绝缘材料的成型模切而开发的产品。