全部

1·The Problem of bars subjected to axial tension and bending is also described here.

对于拉弯构件问题，本文也作了论述。

2·When flange is withstanding axial tension or crook moment, its purpose should be considered otherwise.

当法兰承受轴向拉力或弯矩时，应另行考虑其作用。

3·The authors introduce a sensor based on magneto-elastic effect to measure the axial tension of steel cable.

本文介绍了一种建立在磁弹效应原理基础上的可用来测量钢索轴向拉力的传感器。

4·The cables will be slack when the cables are not subject to axial tension due to the excessive motions of platform.

在不承受轴向张力时，纤维系缆将处于松弛状态，因此在深海平台大幅、往复运动下，系缆将可能出现绷紧和松弛两种状态。

5·The fatigue behavior of concrete under axial tension with constant and variable amplitude cyclic loading is investigated.

基于室内试验，研究了混凝土在等幅和变幅重复荷载作用下的轴拉疲劳性能。

6·By using molecular dynamics(MD) method, the axial tension and compression of the (10,10) carbon, BN nanotubes and nanopeapods were simulated.

采用分子动力学方法，模拟了（10，10）碳、氮化硼纳米管及纳米豆荚的轴向拉伸与压缩。

7·The lower chord of a vierendeel truss, when loaded, is subjected to the combined action of prestressed compression, large axial tension, moment and shear.

空腹屋架下弦处于预压力、强大的轴拉力、弯矩和剪力共同作用下工作。

8·The practice proves that it needs to be further discussed that the flexible suspenders of a large-span half through bridge are designed as axial tension members.

实践证明，大跨中承式拱桥柔性吊杆按照轴心受拉杆件进行设计的方法有待商榷。

9·Complete stress-deformation curves for concrete in tension were obtained from axial tension tests in which some of the specimens were tested under cyclic loading.

本文通过试件的中心受拉试验，测定了砼的受拉应力-变形全曲线。部分试件还进行了反复荷载试验。

10·The calculating method, optimum strengthening design and application of axial tension and compression members strengthened by prestressing is analyzed and discussed.

分析和研究了预应力加固轴心受拉和轴心受压构件的计算方法、优化加固设计及其应用。