全部

1·For duplex stainless steel thermal cutting shall be limited to the plasma arc method.

对双相不锈钢进行热切割应该仅限于等离子弧切割方法。

2·The pump is offered in a wide range of materials including duplex stainless steel grades.

该泵的材质有宽泛的选择，包括双向钢等级。

3·The effect of thermal ageing on the magnetic susceptibility of a duplex stainless steel has been studied.

研究了热时效对副复式不锈钢磁敏感性的影响。

4·The weldability of the 2205 duplex stainless steel were investigated and the key welding technique was introduced.

对2205双相不锈钢的焊接性能进行了研究分析，对材料的焊接技术关键进行了介绍。

5·The influence to corrosion resistant ability of duplex stainless steel (SAF2205) after solution treatment to weld joint.

分析了采用焊后固溶处理对SAF2205双相不锈钢耐腐蚀性能的影响。

6·The research progresses of welding between duplex stainless steel and carbon steel in domestic and abroad are summarized.

综述了近年来国内外双相不锈钢与碳钢异种金属的焊接研究进展。

7·The hot tensile strain process of the microstructure of duplex stainless steel was investigated with high temperature microscope (CSLM).

本文利用共聚焦激光扫描高温显微镜(CSLM)等设备对双相不锈钢的高温拉伸微观变形过程进行了研究。

8·The progress in the research, small - scale production and technical transfer of new rare earth duplex stainless steel SG52 is presented.

介绍了新型稀土双相不锈钢SG52的研制、小批量生产、应用及其技术转让等进展情况。

9·The solution treatments were performed with the specimens of 2205 duplex stainless steel, which possessed different initial microstructures.

对原始组织为铸态和热轧态的2205双相不锈钢试样进行了不同条件下的固溶处理热模拟试验。

10·It simply introduced the content control technique for both ferrite and austenite phase in a duplex stainless steel and its corrosion resistance.

本文简要介绍了双相不锈钢的铁素体和奥氏体两相的控制技术及它的耐腐蚀性能。