全部

1·The Multi-work Condition Declivitous Impact Testing System was introduced which has variable impacting angle, rigidity, and length of stroke.

论述了多工况倾斜冲击试验系统，该系统具有可变的冲击角度，刚度和行程长度。

2·The work condition is satisfactory.

作业条件令人满意。

3·We find the work condition here much improved.

我们发现这里的工作条件大大改善了。

4·If other especial work condition has been required, please contact factory before ordering.

如果要求其他特殊工作条件时，请在订货时与制造厂商联系。

5·This paper lays special emphasis upon the density compensator model for saturated vapor alterable work condition.

本文重点论述了变工况条件下饱和蒸汽密度补偿数学模型的建立。

6·It is the employee's expectation that they can get equitable salary, safe work condition and equally relationship etc.

雇员则期望公司方面能提供公平的薪水、安全的工作环境且雇员平等地对待自己，等等。

7·After a thermodynamics calculation, it was found that it is possible for the die to be cavitated in normal work condition.

经过热力学计算，判断出在正常工作状态下模板发生汽蚀的可能性。

8·The average dust removal efficiency of the SW type smoke gas purifying device can reach 96.4% under the normal work condition.

在正常工作条件下，SW型燃煤炉窑烟气净化装置的平均除尘效率可达96 4%。

9·It also qualifies the work condition and applicable loads of APF through analyzing the compensation principle and characteristic.

通过分析系统的工作原理和补偿特性，得到系统的工作条件和适用的负载类型。

10·This system has such strong points as high adaptability, low cost, high efficiency, high veracity of data, and good work condition.

该系统具有适应性强、成本低、效率高、数据准确性高、及工作条件佳等优点。

工况

1·By recognition of work condition, off-line identification and on-line optimization of parameters, hybrid model can be used to simulate dynamics of complex process correctly in a large scale.

通过工况的识别以及模型参数的离线辨识和在线优化，混合模型可以准确地模拟复杂过程在大范围内的动态特性。

2·In recent years, owing to the great number of flange joints and complexity of work condition, the failure rate of flanged joint system is increasing continuously.

近年来，由于法兰连接系统数目的增加、工况条件的复杂性，法兰连接系统的故障率也不断的上升。

3·The paper mainly gives the work condition of neutral current, introduces application of four-pole switch in different grounding systems and problems to be noticed.

文章主要阐述了中性线的工况和各种不同接地系统中四极开关的应用及应用中需要注意的问题。

4·The result indicates the maximum efficiency of calculated work condition is improved from 0.866 to 0.9, and proves optimum design model is accurate.

结果表明，通过优化使计算工况最高效率由0.866提高到0.9，从而证明所提出优化设计模型的准确性。

5·In the dry equipment of the import temperature of collector is often so low which makes the ex port temperature not fit the dry work condition, that the product is influenced.

在集热器型太阳能干燥装置中，常由于集热器的进口温度低，出口温度达不到干燥工况要求，而影响生产。