全部

1·The formulation system is of the characteristics of long mobile time, light settling, small plastic viscosity and yield value, higher compression strength etc.

所研究的水泥浆配方体系具有：可流动时间长、沉降轻微、塑性粘度和屈服值小及凝固后具有较高的抗压强度等特性。

2·Problems of cement slurry yield value via plastic viscosity on design in coalformed gas well cementing was discussed, and 5kinds of low density cement slurry fo…

探讨了塞流固井中水泥浆动塑比的设计问题，给出了五种低密度水泥浆配方。

3·This equipment is to understand the production process of plastic viscosity glue is smooth and ease the vacuum condensate collection of controlling a special energy-saving equipment.

本设备是为了解化胶生产工艺的胶液粘稠度，是缓和真空负压平稳及冷凝水收集控制作用的一种专用节能型配套设备。

4·With the increasing of the yield stress, the velocities of Binghamand particle decrease, but with the increasing of the plastic viscosity, the velocities of Binghamand particle increase.

随着塑性粘度的增加，宾汉流体和颗粒相的主流速度分布出现了与屈服应力带来的影响的相反趋势。

5·The effect of pressure on the apparent viscosity and plastic viscosity is considerable at ambient temperature. However, this effect is reduced gradually with the increase in temperature.

常温时压力对表观粘度和塑性粘度影响很大，但随着温度升高，压力的作用逐渐减小。

6·The results show that the coatings with good application properties have larger apparent viscosity , higher yield stress , lower plastic viscosity and proper thixotropy at lower shear rate.

实验结果表明，使用性能良好的锭模耐火涂料在低剪切条件下，应具有较大的表现粘度与屈服应力，以及较小的塑性粘度和适当的触变性。

7·Mapping rheogram and analyzing thixotropy of fresh cement paste with different superplasticizers by measuring the rheologic parameters such as shearing stress, yield stress and plastic viscosity.

通过测定不同新拌水泥浆体的剪切应力、屈服应力、塑性粘度等流变参数，绘制流变曲线，分析含不同高效减水剂的新拌水泥浆体的触变性。

8·In any case, only good quality thin sections prepared by impregnating the sandstone with coloured low-viscosity plastic should be used.

在任何情况下，都只能用浸染过有色低粘性塑料的砂岩所制成的高质量薄片。

9·By contrast, the viscosity of a melt of a plastic at a constant temperature changes markedly as the shear rate changes.

与之对比的是，塑料熔体在一定温度下粘度随着剪切速率的变化而变化。

10·Plastic dashpots reflecting the material transient response and Newton dashpots mirroring the material viscosity are introduced to describe the viscoplasticity of slip systems.

在晶体滑移系上引入与材料即时响应有关的塑性阻尼器及与材料粘性有关的牛顿阻尼器以计及材料滑移系的粘塑性特性。