全部

1·Next mold will be made from high tear strength RTV for sure.

模具明年将作出从高撕裂强度室温硫化肯定的。

2·For instance, 300%modulus was increased by 77% and tear strength by 38%.

例如，300%定伸应力提高了77%，抗撕裂强度提高了38%。

3·Consider the bursting strength that is required and the tear strength desired.

考虑爆破强度是必需的，所需的撕裂强度。

4·The introduction of OR into SBR and NR enhanced their hardness and tear strength .

纳米累托石的加入可以显著提高SBR和NR的硬度和撕裂强度。

5·Silicone tubing has some limitations, including lower tear strength when compared with PU tubing.

硅胶管有一些限制，包括降低撕裂强度相比，PU管。

6·In this paper, research on curing system of vulcanized silicone rubber aging tear strength after impact.

本文主要研究论述硫化体系对硫化硅橡胶老化后撕裂强度的影响。

7·It has a very high tear strength, high abrasion resistance and is extremely resistant to oils and greases.

它有着高撕扯性，高耐磨性，及非常好的抗油性。

8·The cause leading to deviation of tear strength in measuring tear strength of silicone rubber vulcanizate was analyzed.

分析了在热硫化硅橡胶混炼胶撕裂强度的测试中撕裂强度出现偏差的原因；

9·Tear strength: it is the force required to tear a paper at a precut edge to a specific length and measured in milli-newton.

撕裂度：把一张事先切一小口的纸，撕开到一定长度所需的力，以毫牛顿计算。

10·It is mainly used as rubber reinforcement and filler, to improve their elongation, tear strength and resistance to abrasion.

主要用作橡胶制品的补强剂和填充剂，能明显改善橡胶制品的抗拉强度、抗撕裂性和耐磨性。