全部

1·With increasing Hf content the stress-rupture properties, in particular, the transverse stress-rupture properties of alloy DZ_22 at intermediate temperature are obviously enhanced.

随着铪含量的提高，合金的中温持久性能，特别是中温横向持久性能有所提高。

2·The analyzing results indicate that the longitudinal and the transverse stress in the fibres and the stress concentration are the major reasons that lead to the failure of the fibres ahead of time.

分析的结果表明，纤维布的纵横双向受力以及较大的应力集中是导致其提早破坏的主要原因。

3·In the analysis of the stress and deformation under dynamic loading, the inertia force and damping moment should be considered in addition to the transverse shear effect.

在分析动载荷下的应力和变形时，除考虑横向剪切效应外，还须考虑微段的惯性力和阻尼力矩。

4·Stress distribution at cross section of transverse uniformly distributed load and non-uniformly distributed load applied to concrete cylinder by finite element method is analyzed.

采用有限元的方法计算分析了混凝土圆柱体在受横向均匀线荷载和非均匀线荷载时其横截面上的应力状况。

5·For the brittle ceramic materials, flexural strengths are determined by the stress at fracture in transverse bending tests.

对脆性陶瓷材料来说，抗弯强度即为横向弯曲试验中样品断裂时的应力。

6·It can provide the strip with longitudinal tensile stress and transverse bending stress.

它可使被矫带材产生纵向拉伸应力和横向弯曲应力。

7·Based on the analysis of the transverse distribution of testing measured, the method of constructing influence line of transverse distribution of loads in terms of rebar stress measured is presented.

文中对此桥的实际荷载横向分布进行了分析，提出了用实测钢筋应力推求荷载横向分布影响线的方法。

8·Besides the usual membrane stresses and stress couples the equation also contains additional terms reflecting the influences of transverse shear deformation, rotatory inertia and transverse extrusion.

该方程除了包含通常的薄膜内力项和内矩项外，还反映了横向剪切影响、转动惯性效应和横向挤压影响。

9·Setting transverse diaphragm may remarkably increase the bending rigidity of the structure and improve its stress performance.

增设箱梁横隔板可以增大这种结构的横向抗弯刚度，改善其受力性能。

10·To raise the critical stress of the web, we always lay some transverse stiffeners on the web, and also lay some longitudinal stiffeners sometime.

为了提高腹板的临界应力，通常都设有腹板横向加劲肋，有时还在梁中段加设纵向加劲肋。