全部

1·The object of this dissertation is to calculate the height of screw mandrils from CAD data and develop a mechanical hand to adjust screw mandrils' height automatically.

本文主要介绍根据CAD造型数据计算上下模冲压顶杆的高度，并开发一台顶杆高度自动调节机械手调节离散型面模具顶杆高度。

2·We can adjust the levelness of the machine by means of shim and screw jack.

我们可以利用垫铁和螺丝千斤顶来调整机器的水平度。

3·Cup head screws, When should adjust the handwheel on the frame, the first to loosen the screw so that fixed the handwheel.

杯头螺丝；当要调节手轮在机架上的位置时，先要松开此螺丝，以便固定手轮。

4·Electrically activities;. When should adjust pulling the area is pulling the machine to loosen the screw, casters activities.

活动脚轮；当要调节拉网机拉网的面积时先要松开活动脚轮，螺丝。

5·Then use the same screw to adjust for a smooth transition from idle to full throttle.

然后使用低速油针调整从怠速到全速引擎都能平顺运转。

6·Install the base on the ground, and adjust even using the level. Fix the screw, and connect the base and ground.

将底座安装在已打好的基础上，并用水平仪调平。拧好地脚螺栓上的螺母，将底座与基础固定联接。

7·Add fine adjust device for the pressure of foot, without dial on the adjustable screw, more convenience for operation.

压脚压力采用微调装置，压力调节螺钉设有刻度，更加方便操作。

8·Also let us adjust the size or pitch of the screw propeller, then try to get high-speed running.

也让我们调整大小或摊位的螺旋桨，然后尝试获得高速运行。

9·To adjust the setting of the valve, loosen locking cap screw with hex wrench, see Figure 3.

如果要调节阀门的设置，则利用六角扳手松开锁紧帽螺丝，参阅图3。

10·Remove the throat plate, loosen hook screw 6 and adjust the hook.

调整旋梭时，请卸下针板，拧松旋梭固定螺丝6，然后进行调整。