全部

1·The single lap joint fails when the crack length reaches to the critical size.

当裂纹扩展到临界尺寸时，接头会迅速破坏。

2·Create control points and critical size requirements for production during manufacturing process.

为生产过程设置主要控制点和关键尺寸控制要求。

3·A relationship between the casting speed and the critical size of the non-metallic inclusions is given.

给出了拉速和夹杂临界直径的关系。

4·It is predicted th at there exist minimum critical size and lowest melting temperature for metallic nanoparticle.

并根据上述函数得出了金属晶体纳米微粒存在的最小临界尺寸表达式与最低熔化温度表达式。

5·The adoption of said invented method can retain the critical size of line width, and can improve its product quality.

采用本发明可保持线宽的临界尺寸，和产品的优良率可获得改进。

6·In the framework of the Landau theory of phase transition, we derived an expression of the ferroelectric critical size.

在朗道相变理论的框架内，我们推导了铁电临界尺寸的表示式。

7·The existence of domain walls reduces both the spontaneous polarization and the Curie temperature, and increases the critical size.

畴壁的存在使自发极化和居里温度降低，使临界尺寸增大。

8·The influence of salt medium, annealing temperature and the critical size of nanoparticles on growth process was analyzed in detail.

分析了纳米颗粒前驱体的大小、盐介质的选取、热处理温度等因素对纳米颗粒固相生长的影响。

9·When the inclusion size in the spring steel is larger than the critical size of inclusions, the probability of fatigue failure will increase.

当弹簧钢中的夹杂物尺寸大于临界夹杂物尺寸时，容易造成疲劳强度失效。

10·In addition, we also obtained the lower and upper limits of the precise critical size of single-domain, and also its exact value in particular cases.

此外，还得到了严格单畴临界尺寸上下限的一个估计，以及在特殊情况下这种临界尺寸的精确结果。