全部

1·Deformation extent is described by burring factor in the process of round hole burring.

在圆孔翻边过程中，变形程度是用翻边系数来描述的。

2·The size of upsetting-burring punch and angle of support panel also have great impacts on the upsetting-burring.

镦粗凸模尺寸以及下支撑板斜角对镦粗翻边有较大的影响。

3·Finally, the traditional burring and upsetting-burring processes for the thick sheet of aluminum alloy were verified.

最后，对铝合金厚板的传统圆孔翻边和局部镦粗圆孔翻边工艺进行了验证。

4·Briefed in the article are the inner burr formation of and the burring method for the hi-frequency straight welded tube.

简要介绍了高频直缝焊管内毛刺的形成和清除方法。

5·DAIWA RABIN provides the most suitable product for de-burring that is troublesome with a wide range of materials, sizes and any shapes.

大和化成海绵轮是最合适的用于深处去毛刺的产品，可用于多种材质，尺寸，形状。

6·It is a burring equipment of machining gears, be the same with the tooth parts of spur gears, helical gears, bevel gears, chain wheel and so on.

齿轮倒棱机是对齿轮加工过程中形成的毛刺进行处理的设备。适用于加工各种直齿、斜齿、伞齿、链轮等齿形零件。

7·Cut out the pipe with pipe facilities. To avoid damaging the sealing ring, thepipe ends must beburred with special burring tool or file completely.

使用切管设备切断管子，为避免刺伤密封圈，请使用专用除毛刺器或锉刀将毛刺完全除净。

8·The differences of stress state between extrusion-flanging and traditional flanging, and the influences of curvature radius of burring punch on flange height were analyzed.

分析了挤压翻边与传统翻边应力状态的不同之处，以及翻边凸模的冲头曲率半径对翻边效果的影响。

9·In some applications of manufacture, for example robot burring, grinding, polishing, and robot auto assembly, the contacting force control between robot and its environments are critical.

在一些生产作业中，如机械手去毛刺作业、研磨、抛光和机械手自动装配作业，机械手的接触力控制是相当关键的。