全部

1·The abrasiveness of white cast iron with low alloy content was studied through abrasion test.

通过磨损试验研究了变形对低合金耐磨铸铁耐磨性的影响。

2·And process methods for ensuring corrosion resistance, abrasiveness of anodized film are pointed out.

指出了为保证氧化膜的耐蚀性、耐磨性而采取的工艺措施。

3·The negative effect of this reinforcement is usually a decrease in impact strength and an increase in abrasiveness.

这种加强的负作用通常是抗冲击强度降低及磨损性增加。

4·The research results show that the steel fiber can improve remarkably the strength of the phosphate cement mortar, reduce its shrinkage and enhance its abrasiveness.

研究结果表明，掺入钢纤维可显著提高磷酸镁水泥砂浆的强度，降低砂浆的收缩率及提高砂浆的耐磨性能；

5·Based on diverse working condition featured by dust, abrasiveness, high temperature and strong magnetic field, two or three layers of insulation is considered when designing.

根据电解车间内多粉尘、磨损性、高温度、强磁场的恶劣工作条件，有针对性地设计了两层至三层绝缘层。

6·Careful consideration during the design phase to ash slurry properties, such as abrasiveness and particle size, will lead to more efficient and longer-lasting sluiceways and pipes.

设计阶段应仔细考虑灰浆的性质，如磨蚀性和粒度-目的在于使得溜槽和管道更有经久有效利用。

7·As with conventional bucket, the taper bucket is manufactured from high quality quench and tempered steels allowing for high strength, as well as high abrasiveness in required areas.

象传统铲斗一样，锥形铲斗也在需要的部位使用高质量的，既具有高强度又耐腐蚀的调质钢。

8·The slagging, fouling and abrasiveness performances of co-firing low-temperature pyrolyzed biomass with coal depend on the ash content, the ash component of them and their blending rate, etc.

热解生物质与煤共燃时的结渣、积灰和磨损特性取决于热解生物质灰分含量、灰成分，煤的灰分含量、灰成分以及混合比例等因素。